GOST 21296-1975 Gentring bushes with screw hole for heated core boxes Design and dimensions《加热型芯箱用带螺纹孔定心衬筒 结构及尺寸》.pdf

相关资源

GOST 21297-1975 Guide bushes with screw hole for heated core boxes Design and dimensions《加热型芯箱用带螺纹孔导向衬套 结构及尺寸》.pdf

GOST 21298-1975 Pins with screw hole for heated core boxes Design and dimensions《加热型芯箱用带螺纹孔销钉 结构及尺寸》.pdf

GOST 21299-1975 Pins with screw tail for heated core boxes Design and dimensions《加热型芯箱用带螺纹尾端销钉 结构及尺寸》.pdf

GOST 19399-1974 Sand blast bushes for core boxes Design and dimensions《型芯箱用带密封喷砂衬套 结构及尺寸》.pdf

猜你喜欢

ASTM D6531-2000(2005) Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement《用仪器测量含水墨的相对着色度的标准试验方法》.pdf

ASTM D6531-2000(2010) 5000 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement《仪器测量水基墨水的相对着色度的标准试验方法》.pdf

ASTM D6532-2000(2006) Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens《水硬水泥沙浆样本吸水性清水防护.pdf

ASTM D6532-2000(2014) 2122 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens《水硬水泥沙浆样本吸水.pdf

ASTM D6534-2005 Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser《测定机械泵分配器最大推动力的标准试验方法》.pdf

ASTM D6534-2005(2010) 0625 Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser《测定机械泵分配器启动力峰值的标准试验方法》.pdf

ASTM D6534-2018 red 4375 Standard Practice for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser.pdf

ASTM D6535 D6535M-2005(2010)e1 0625 Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser《测定机械泵分配器汲取管长度的标准试验方法》.pdf

ASTM D6535 D6535M-2018 red 3125 Standard Practice for Determining the Dip Tube Length of a Mechanical Pump Dispenser.pdf