GOST 21342 11-1976 Varistors Method of measuring current asymmetry and voltage asymmetry《压敏电阻器 电流不对称性测量方法》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1424-1-1998 给水设施噪声的实验室试验方法.第1部分 测量方法.pdf

JIS A1431-1994 空调和通风系统的风量测量方法.pdf

JIS B5031-2003 冲压模成套模具准确度和测量方法.pdf

ANSI IEC C78.60360-2002 电灯 灯头温度升高的标准测量方法.pdf

JIS A1416-2000 声学 建筑物元件的气载声音隔绝的实验室测量方法.pdf

JIS A1520-1988 门和窗的隔声现场测量方法.pdf

JIS A8403-5-1998 土方机械.液压挖掘机.第5部分 机械过加载的测量方法.pdf

JASO D002-1991 汽车无线电干扰特性测量方法.pdf

猜你喜欢

FORD WSB-M2D409-A-2006 POLYURETHANE (PUR) FOAM ACOUSTICAL 64 KG M3 TO BE USED WITH FORD WSS-M99P1111-A 《64 KG M3声学用聚氨酯（PUR）泡沫 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M2D452-A-2010 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用热塑性弹性体（TEEE）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M2D452-A2-2004 THERMOPLASTIC ELASTOMER (TEEE) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSB-M2D452-A)《汽车内部用热塑性弹性体(TEEE)成型料 与标准FORD WSS-M99.pdf

FORD WSB-M2D456-A-2009 POLYURETHANE (PUR) FOAM CAST TO BE USED WITH FORD WSS-M99P1111-A 《聚氨酯（PUR）泡沫铸件 与标准FORD WSS-M99P1111-A一起使用 ［使用 FORD WSS-M99P32-C］》.pdf

FORD WSB-M2D462-A1-2010 THERMOPLASTIC ELASTOMER CHLORINATED ETHYLENE [TE(PE-C)] 60 A HARDNESS EXTERIOR ONLY TO BE USED WITH FORD WSS-M99P1111-A 《仅外部硬度为60A的含氟乙烯[TE(PE-C)]热塑性弹性体 与.pdf

FORD WSB-M2D462-A2-2010 THERMOPLASTIC ELASTOMER CHLORINATED ETHYLENE [TE(PE-C)] 70 A HARDNESS EXTERIOR ONLY TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M2D462-A1)《仅外部硬.pdf

FORD WSB-M2D462-A3-2010 THERMOPLASTIC ELASTOMER CHLORINATED ETHYLENE [TE(PE-C)] 80 A HARDNESS TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSB-M2D462-A1)《仅外部硬度为80A的含氟乙烯[TE(.pdf

FORD WSB-M2D467-A-2009 THERMOPLASTIC POLYOLEFIN (TPO) MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车内部用热塑性聚烯烃（TPO）成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSB-M2D477-A-2004 THERMOPLASTIC ELASTOMER MOLDING COMPOUND EXTERIOR PVC AND NITRILE RUBBER MOLECULAR BLEND TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用聚氯乙烯(PVC)和丁腈橡胶混合物热塑性弹性体成.pdf