GOST 21803 1-1976 Vacuum enclosed prove tubes Methods of measurement of heater voltage and current《真空指示计 灯丝电流和灯丝电压测量方法》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1424-1-1998 给水设施噪声的实验室试验方法.第1部分 测量方法.pdf

JIS A1431-1994 空调和通风系统的风量测量方法.pdf

JIS B5031-2003 冲压模成套模具准确度和测量方法.pdf

ANSI IEC C78.60360-2002 电灯 灯头温度升高的标准测量方法.pdf

JIS A1416-2000 声学 建筑物元件的气载声音隔绝的实验室测量方法.pdf

JIS A1520-1988 门和窗的隔声现场测量方法.pdf

JIS A8403-5-1998 土方机械.液压挖掘机.第5部分 机械过加载的测量方法.pdf

JASO D002-1991 汽车无线电干扰特性测量方法.pdf

猜你喜欢

GOST 19061-1980 Parallelogram throw-away (indexable) carbide cutting inserts with 84 included angle and chamfered cutting edges Design and dimensions《可转位的带切削刀的84平行四边形多面的硬质合金切削刀片 结构.pdf

GOST 19062-1980 Parallelogram throw-away (indexable) carbide cutting inserts with 55 included angle and chip-breaking flutes on one face only Design and dimensions《可转位的单侧有切屑槽的55平行四.pdf

GOST 19063-1980 Pentagon throw-away (indexable) carbide cutting inserts Design and dimensions《可转位的五棱形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19064-1980 Pentagon throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的带孔的五棱形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19065-1980 Pentagon throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的带孔和单侧有切屑槽的五棱形多面的硬.pdf

GOST 19067-1980 Hexagon throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的有孔的六棱形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19068-1980 Hexagon throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的有孔的和单侧有切屑槽的六棱形多面的硬.pdf

GOST 19069-1980 Round throw-away (indexable) carbide cutting inserts Design and dimensions《可转位的圆形多面的硬质合金切削刀片 结构及尺寸》.pdf

GOST 19070-1980 Round throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的带孔的圆形多面的硬质合金切削刀片 结构及尺寸》.pdf