GOST 22064-1976 Injection mould bases with take-off and ejector plate Design and dimensions《压力热塑铸造用带起出器板和起箱板压模坯料 结构及尺寸》.pdf

相关资源

GOST 22082-1976 Injection mould bases detail-blanks and details of injection moulds Specifications《压力热塑铸造用带起出器板和起箱板压模坯料 技术条件》.pdf

猜你喜欢

ANSI ATIS 1000109-2014 Exchange-Interexchange Carrier Interfaces C 950+XXXX EC-to-IC Access Signaling Protocols.pdf

ANSI ATIS 1000110-1999 Signalling System Number 7 (SS7) C General Information.pdf

ANSI ATIS 1000111-2005 Signalling System Number 7 (SS7) C Message Transfer Part (MTP).pdf

ANSI ATIS 1000112-2005 Signaling System Number 7 (SS7) - Signaling Connection Control Part (SCCP).pdf

ANSI ATIS 1000112A-2006 Subsystem Number Assignment Guidelines (Supplement to ATIS-1000112-2005).pdf

ANSI ATIS 1000113-2013 Signaling System No 7 (SS7) C Integrated Service Digital Network (ISDN) User Part.pdf

ANSI ATIS 1000114-2004 Signalling System Number 7 (SS7) C Transaction Capabilities Application Part (TCAP) (Formerly ATIS T1.114).pdf

ANSI ATIS 1000116-2000 Signalling System Number 7 (SS7) C Operations Maintenance and Administration Park (OMAP).pdf

ANSI ATIS 1000118-1992 Signalling System Number 7 (SS7) C Intermediate Signalling Network Identification (ISNI).pdf