GOST 24267-1980 Plate-blanks of portable press moulds for manufacturing of industrial rubber articles Design and dimensions《橡胶工业制品生产用可卸压模坯板 结构及尺寸》.pdf

相关资源

NB T 10366-2019 煤矿卸压瓦斯地面钻井抽采技术方法.pdf

BS ISO 21013-1-2008 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Reclosable pressure-relief valves《低温容器 低温设备用卸压附件 可重新盖紧的卸压阀》.pdf

NB T 20268-2014 压水堆核电厂安全阀和卸压阀管系设计准则.pdf

EJ T 339-1988 压水堆核电厂安全阀和卸压阀管系设计准则.pdf

BS ISO 21013-2-2007 Cryogenic vessels - Pressure-relief accessories for cryogenic service - Non-reclosable pressure-relief devices《低温容器 低温设施用卸压附件 打开后不能重新盖紧的卸压装置》.pdf

GB T 25217.10-2019 冲击地压测定、监测与防治方法 第10部分：煤层钻孔卸压防治方法.pdf

CNS 13301-2002 Method of inspection for gas pressure welded joint of steel bars for concrete reinforcement《钢筋混凝土用钢筋瓦斯压接接头检查法》.pdf

GOST 24516-1980 Packets quick-changing with horisontal break of press-moulds for manufacturing of rubber O-rings section Construction and dimensions《制造大截面橡胶圈用横向可卸压卸的快速更换组件 结构及尺寸》.pdf

GB T 25217.11-2019 冲击地压测定、监测与防治方法 第11部分：煤层卸压爆破防治方法.pdf

CNS 13302-1993 Method of Ultrasonic Examination for Gas Pressure Welds of Reinforcing Deformed Bars《钢筋混凝土用竹节钢筋瓦斯压接部超音波探伤试验法》.pdf

猜你喜欢

BS EN 10031-2003 Semi finished products for forging Tolerances on dimensions shape and mass《锻造用半成品 形状 质量和尺寸规格公差》.pdf

BS EN 10034-1993 Structural steel I and H sections - Tolerances on shape and dimensions《工字型和 H 型结构钢 形状和尺寸公差》.pdf

BS EN 10036-1991 Chemical analysis of ferrous materials - Determination of total carbon in steels and irons - Gravimetric method after combustion in a stream of oxygen《黑色金属材料的化学分析 .pdf

BS EN 10048-1997 Hot rolled narrow steel strip - Tolerances on dimensions and shape《热轧窄钢带 尺寸和形状公差》.pdf

BS EN 10049-2013 Measurement of roughness average $iR$ia and peak count $iR$iP$ic on metallic flat products《金属扁平制品平均粗糙程度Ra和峰值计数RPc的测量》.pdf

BS EN 10051-2010 Continuously hot-rolled strip and plate sheet cut from wide strip of non-alloy and alloy steels Tolerances on dimensions and shape《非合金钢和合金钢连续热轧的未涂覆板材 薄板材和带材规范 尺寸规格.pdf

BS EN 10055-1996 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions《带圆角齿根和齿顶的热轧钢等边二层交错凸缘 尺寸和形状及尺寸公差》.pdf

BS EN 10056-1-2017 Structural steel equal and unequal leg angles Dimensions《等角和非等角结构钢 尺寸》.pdf

BS EN 10056-2-1993 Specification for structural steel equal and unequal angles - Tolerances on shape and dimensions《等边和不等边结构角钢 形状和尺寸公差》.pdf