GOST 24831-1981 Package equipment Types basic parameters and dimensions《容器－器具 型式、基本参数及尺寸》.pdf

相关资源

JB T 11047.1-2010 脱硫包 第1部分 基本参数.pdf

JB T 11813.1-2014 纵剪机 第1 部分：型式和基本参数.pdf

JB T 3356-1992 低温液体容器 基本参数.pdf

JB T 6391.1-1992 起重机滑接输电装置 型式和基本参数.pdf

MT 330-1993 XG.XC系列 立井大型多绳箕斗卸载设备基本参数.pdf

MT 331-1993 JL系列 立井大型多绳箕斗基本参数.pdf

GB T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备.pdf

GB T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台.pdf

GB T 5170.5-1996 电工电子产品环境试验设备基本参数检定方法 湿热试验设备.pdf

CB- 3180-1983 船用离心式泥泵型式与基本参数.pdf

猜你喜欢

AECMA PREN 4390-1997 Aerospace Series Nuts Anchor Self-Locking Floating Self-Aligning Two Lug in Heat Resisting Steel Silver Plated Classification 900 MPa (at Ambient Temperature).pdf

AECMA PREN 4396-1999 Aerospace Series Shaft-Nuts Self-Locking in Heat Resisting Steel FE-PA92HT (A286) Silver Plated Edition P 1 [Replaced ASD-STAN PREN 3295]《航空航天系列.轴螺母自动锁耐热钢FE-PA.pdf

AECMA PREN 4399-1999 Aerospace Series Rings Threaded Self-Locking in Heat Resisting Steel FE-PA92HT (A286) Silver Plated Edition P 1《航空航天系列.有螺纹自动锁耐热钢FE-PA92HT(A286)银器.P1版》.pdf

AECMA PREN 4400-1-1999 Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 1 Plate Edition P 1《航空航天系列.铝和铝合金锻制品技术规范.第1部分 板材》.pdf

AECMA PREN 4400-2-2000 Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 2 Sheet and Strip Edition P 1 Will Supersede EN 2070-1 1989 + e.pdf

AECMA PREN 4400-3-2001 Aerospace Series Aluminium and Aluminium Alloy Wrought Products Technical Specification Part 3 Bar and Section Edition P 1《航空航天系列.铝和铝合金锻制品技术规范.第3部分 棒材和型材》.pdf

AECMA PREN 4400-6-2003 Aerospace Series Aluminium and Aluminum - and Magnesium - Alloys Technical Specification Part 6 Aluminum Alloy Forging Stock Edition P 1《航空和航天 铝合金和镁合金铸件 交货的技.pdf

AECMA PREN 4401-1999 Aerospace Series Lockbolts Protruding Head Sheartype Close Tolerance in Titanium Alloy TI-P64001 with Aluminium Pigmented Coating Metric Series Classification .pdf

AECMA PREN 4402-1999 Aerospace Series Lockbolts 100 Degree Countersunk Normal Head Sheartype Close Tolerance in Titanium Alloy TI-P64001 with Aluminium Pigmented Coating Metric Ser.pdf