GOST 24897-1981 Solid magnetik deformed materials Marks《变形硬磁材料 牌号》.pdf

相关资源

GB T 17951-2000 硬磁材料一般技术条件.pdf

GB T 17951-2005 硬磁材料一般技术条件.pdf

GB T 17951-2000 硬磁材料一般技术条件.pdf

GB T 17951-2005 硬磁材料一般技术条件.pdf

GOST 21559-1976 Magnetically hard sintered materials Marks《烘烤的硬磁材料 牌号》.pdf

GOST 17809-1972 Casting hard magnetic materials Marks《铸造硬磁材料 标志》.pdf

猜你喜欢

DIN 6917-1989 Square taper washers for high-strength structural bolting of steel I sections《“工”字形钢型材高强度螺栓连接用的方锥形垫圈》.pdf

DIN 6918-1990 Square taper washers for high-strength structual bolting of steel channel sections《钢结构U型梁高强度螺栓连接用四角楔形垫圈》.pdf

DIN 6929-2013 Screws with coarse thread and reduced shank for captive applications《粗牙螺纹螺丝和捕获用细杆》.pdf

DIN 6930-1-2011 Stamped steel parts - Part 1 Technical delivery conditions《冲压钢构件 第1部分 技术交货条件》.pdf

DIN 6930-2-2011 Stamped steel parts - Part 2 General tolerances《冲压钢构件 第2部分 通用公差》.pdf

DIN 6932-2011 Design rules for stamped steel parts《冲压钢构件的设计规范》.pdf

DIN 6935 Bb 1-2011 Cold bending of flat rolled steel - Supplement 1 Factors determining the correction value for calculating length of flats prior to bending《平轧钢冷弯加工 补充件1 决定扁钢冷弯加工前.pdf

DIN 6935 Bb 2-2011 Cold bending of flat steel products - Supplement 2 Calculated compensating values 《冷弯钢或扁钢产品 补充件2 计算的补偿值》.pdf

DIN 6935-2011 Cold bending of flat rolled steel《平轧钢冷弯》.pdf