GOST 25024 3-1983 Signal produce displays Measuring methods of current and voltage《符号合成指示器 电流与电压测量方法》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1424-1-1998 给水设施噪声的实验室试验方法.第1部分 测量方法.pdf

JIS A1431-1994 空调和通风系统的风量测量方法.pdf

JIS B5031-2003 冲压模成套模具准确度和测量方法.pdf

ANSI IEC C78.60360-2002 电灯 灯头温度升高的标准测量方法.pdf

JIS A1416-2000 声学 建筑物元件的气载声音隔绝的实验室测量方法.pdf

JIS A1520-1988 门和窗的隔声现场测量方法.pdf

JIS A8403-5-1998 土方机械.液压挖掘机.第5部分 机械过加载的测量方法.pdf

JASO D002-1991 汽车无线电干扰特性测量方法.pdf

猜你喜欢

ASTM A507-2012 Standard Specification for Drawing Alloy Steel Sheet and Strip Hot-Rolled and Cold-Rolled《热轧和冷轧拉制合金钢薄板材与带材标准规格》.pdf

ASTM A507-2016 Standard Specification for Drawing Alloy Steel Sheet and Strip Hot-Rolled and Cold-Rolled《热轧和冷轧拉拔合金钢薄板和带材的标准规格》.pdf

ASTM A508 A508M-2005b Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels.pdf

ASTM A508 A508M-2005b(2010) Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels《压力容器用经淬火和回火真空处理的碳素钢与合金钢锻件的标准规范》.pdf

ASTM A508 A508M-2014 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels《压力容器用经淬火和回火真空处理的碳素钢与合金钢锻件的标准规格》.pdf

ASTM A508 A508M-2016 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels《压力容器用淬火和回火真空处理的碳和合金钢锻件的标准规格》.pdf

ASTM A508 A508M-2017 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels《压力容器用淬火和回火真空处理碳素合金钢锻件的标准规格》.pdf

ASTM A508 A508M-2018 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels《压力容器用调质真空处理碳钢和合金钢锻件的标准规范》.pdf

ASTM A510 A510M-2011 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire Carbon Steel《碳素钢盘条和粗圆钢丝通用要求的标准规格》.pdf