GOST 25354-1982 Forging complexes computer controller Basic parameters and dimensions《带程序控制的锻造设备 基本参数及尺寸》.pdf

相关资源

JB T 11047.1-2010 脱硫包 第1部分 基本参数.pdf

JB T 11813.1-2014 纵剪机 第1 部分：型式和基本参数.pdf

JB T 3356-1992 低温液体容器 基本参数.pdf

JB T 6391.1-1992 起重机滑接输电装置 型式和基本参数.pdf

MT 330-1993 XG.XC系列 立井大型多绳箕斗卸载设备基本参数.pdf

MT 331-1993 JL系列 立井大型多绳箕斗基本参数.pdf

GB T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备.pdf

GB T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台.pdf

GB T 5170.5-1996 电工电子产品环境试验设备基本参数检定方法 湿热试验设备.pdf

CB- 3180-1983 船用离心式泥泵型式与基本参数.pdf

猜你喜欢

GOST 19045-1980 Triangular throw-away (indexable) carbide cutting inserts with 11 end-clearance angle Design and dimensions《可转位的多面体带厚角的正三棱形硬质合金切削刀片 结构及尺寸》.pdf

GOST 19046-1980 Triangular throw-away (indexable) carbide cutting inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的多面体带孔和单侧有切屑槽的正三.pdf

GOST 19047-1980 Hexagon throw-away (indexable) carbide cutting inserts with 80 included angle and cylindrical holes Design and dimensions《可转位的多面体带孔和80角的六棱形硬质合金切削刀片 结构及尺寸》.pdf

GOST 19048-1980 Hexagon throw-away (indexable) carbide cutting inserts with 80 included angle with cylindrical holes and chip-breaking flutes Design and dimensions《可转位的多面体成80角的带孔和切.pdf

GOST 19049-1980 Square throw-away (indexable) carbide cutting inserts Design and dimensions《可转位的正方形多面硬质合金切削刀片 结构及尺寸》.pdf

GOST 19050-1980 Square throw-away (indexable) carbide cutting inserts with 11 end-clearance angle Design and dimensions《可转位的带11后角的正方形多面硬质合金切削刀片 结构及尺寸》.pdf

GOST 19051-1980 Square throw-away (indexable) carbide cutting inserts with cylindrical holes Design and dimensions《可转位的带孔多面的正方形硬质合金切削刀片 结构及尺寸》.pdf

GOST 19052-1980 Square throw-away (indexable) carbide inserts with cylindrical holes and chip-breaking flutes on one face only Design and dimensions《可转位的带孔多面和单侧有切屑槽的正方形硬质合金切削刀片 结构及.pdf

GOST 19053-1980 Square throw-away (indexable) carbide cutting inserts with cylindrical holes and secondary edges at cutting points Design and dimensions《可转位的带孔和顶端有斜边的正方形多面硬质合金切削刀片 .pdf