GOST 25411-1990 Hard metal brazed tips type 31 Design and dimensions《31型钎焊硬质合金刀片 结构及尺寸》.pdf

相关资源

JIS B4111-1991 拉制丝和杆用硬质合金模.pdf

JIS B4805-1994 硬质合金圆盘锯.pdf

JIS M3916-1983 矿山工具用硬质合金刀片.pdf

HB 777-1973 1~8级精度用硬质合金圆锥尾量头D6~30mm.pdf

HB 779-1973 1~8级精度用硬质合金套量头双头光面塞规D30~80mm.pdf

HB 781-1973 1~8级精度用硬质合金非全形单头带柄光面规D80~180mm.pdf

HB 787-1973 1~9级精度用硬质合金单头组合卡规D3~10mm.pdf

HB 788-1973 1~9级精度用硬质合金单头圆片形卡规D6~260mm.pdf

HB 798-1974 塞规用硬质合金环毛坯d=4.6~30.8mm.pdf

HB 799-1989 塞规卡规用硬质合金片毛坯.pdf

猜你喜欢

ASTM D4780-2012 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂及催化剂载体的低表面面积的标准试验方法》.pdf

ASTM D4780-2012(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption《用多点氪吸附法测定催化剂的低表面面积的试验方法》.pdf

ASTM D4781-2003 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles《精细催化剂颗粒和催化剂载体颗粒的机械振实填充密度的标准试验方法》.pdf

ASTM D4781-2003(2008) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles《催化剂细粒和催化剂载体粒子机械振动堆积密度的标准试验方法》.pdf

ASTM D4781-2003(2013) Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles《催化剂细粒和催化剂载体粒子机械振动堆积密度的标准试验方法》.pdf

ASTM D4781-2003(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles.pdf

ASTM D4782-2004 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry《用湿化学法测定分子筛催化剂中钯的标准试验方法》.pdf

ASTM D4782-2010 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry《湿化学法测定分子筛催化剂中的钯的标准试验方法》.pdf

ASTM D4782-2010(2016) Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry《采用湿化学法测定分子筛催化剂中钯的标准试验方法》.pdf