GOST 27809-1995 Cast iron and steel Methods of spectrographic analysis《铸铁及钢 光谱分析法》.pdf

相关资源

JIS G1258-2-2007 铁及钢—ICP发光光谱分析方法—第2部：锰、镍、铬、钼、铜、钨、钒、钴、钛及铌定量方法—硫酸磷酸分解法.pdf

JIS K0119-1997 X射线萤光光谱分析方法通则.pdf

JIS C6192-2008 光谱分析仪的校准.pdf

JIS C6122-5-1-2001 光纤放大器.试验方法.第5-1部分反射参数试验方法.光谱分析仪试验方法.pdf

JIS G1256-1997 钢铁的X射线荧光光谱分析法 Iron and steel -- Method for X-ray fluorescence spectrometric analysis.pdf

JIS G1257-1994 钢铁.原子吸收光谱分析方法 Iron and steel -- Methods for atomic absorption spectrometric analysis.pdf

HB 5219.13-1998 镁合金化学分析方法原子吸收光谱分析法测定锌含量.pdf

DL T 991-2006 电力设备金属光谱分析技术导则.pdf

HB 5219.11-1998 镁合金化学分析方法原子吸收光谱分析法测定镍含量.pdf

HB 5219.3-1998 镁合金化学分析方法原子吸收光谱分析法测定铜含量.pdf

猜你喜欢

ASTM F2508-2016 Standard Practice for Validation Calibration and Certification of Walkway Tribometers Using Reference Surfaces《采用参考表面对走道摩擦计进行验证 校准和认证的标准实施规程》.pdf

ASTM F2508-2016e1 Standard Practice for Validation Calibration and Certification of Walkway Tribometers Using Reference Surfaces《使用参考表面验证 校准和认证走道摩擦计的标准实施规程》.pdf

ASTM F2509-2006 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing《控制聚乙烯气体配送管和管道外径.pdf

ASTM F2509-2006(2012) Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing《外径受控的聚乙烯煤.pdf

ASTM F2509-2012 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing《控制聚乙烯气体配送管和管道外径.pdf

ASTM F2509-2015 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe an.pdf

ASTM F2510 F2510M-2007 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes《钢筋混凝土人.pdf

ASTM F2510 F2510M-2007(2013) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes《.pdf

ASTM F2510 F2510M-2017 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polyprop.pdf