GOST 28375-1989 Compact disc players General technical requirements and methods of measurement《加密盘唱机 一般技术要求和测量方法》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1424-1-1998 给水设施噪声的实验室试验方法.第1部分 测量方法.pdf

JIS A1431-1994 空调和通风系统的风量测量方法.pdf

JIS B5031-2003 冲压模成套模具准确度和测量方法.pdf

ANSI IEC C78.60360-2002 电灯 灯头温度升高的标准测量方法.pdf

JIS A1416-2000 声学 建筑物元件的气载声音隔绝的实验室测量方法.pdf

JIS A1520-1988 门和窗的隔声现场测量方法.pdf

JIS A8403-5-1998 土方机械.液压挖掘机.第5部分 机械过加载的测量方法.pdf

JASO D002-1991 汽车无线电干扰特性测量方法.pdf

猜你喜欢

FORD WSK-M4D689-A4-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 95 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为95 A的聚氯乙烯(PVC)柔性材料 列于标准WSK-.pdf

FORD WSK-M4D689-A5-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 75 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为75 A的柔性聚氯乙烯(PVC) 与标准FORD WS.pdf

FORD WSK-M4D689-A6-2012 POLYVINYL CHLORIDE (PVC) FLEXIBLE 65 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D689-A1).pdf

FORD WSK-M4D689-A7-2007 POLYVINYL CHLORIDE (PVC) FLEXIBLE 60 A HARDNESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on WSK-M4D689-A1)《汽车外部用硬度为60 A的柔性聚氯乙烯(PVC) 与标准FORD WS.pdf

FORD WSK-M4D692-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS EXTRUSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度计显示硬度为D55的乙醚弹性体(T.pdf

FORD WSK-M4D692-A2-1989 THERMOPLASTIC POLYESTER- ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS HEAT STABILIZED EXTRUSION MOLDING COMPOUND (Shown on WSK-M4D692-A1)《硬度为55 D的热塑性聚酯-乙醚.pdf

FORD WSK-M4D693-A1-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度计显示硬度为D55的乙醚弹性体(T.pdf

FORD WSK-M4D693-A2-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 55 DUROMETER D HARDNESS BLACK INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD.pdf

FORD WSK-M4D694-A-2011 THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE) 63 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度计显示硬度为D63的乙醚弹性体(TEEE)模塑材料热塑性.pdf