GOST 28873-1990 Alloys on the basis of heavy non-ferrous metals treated under pressure Unified grades《重有色金属基压力加工合金 统一牌号》.pdf

相关资源

JIS M8101-1988 有色金属矿石中的采样试样制备及水分判定方法.pdf

CB 862.1-1988 有色金属锻件技术条件 铝合金模锻件和自由锻件.pdf

CB 1085.1-1989 仪器仪表制造工时定额 有色金属砂型铸造.pdf

CB 862.2-1988 有色金属锻件技术条件 铜合金模锻件和自由锻件.pdf

CB T 3696-1995 有色金属产品物资分类与代码.pdf

JB 5889-1991 绝缘子用有色金属铸件技术条件.pdf

DZ T 0101.9-1994 地质仪器仪表制造时间定额有色金属铸造.pdf

JB T 7677-2007 有色金属卧式挤压机.pdf

JB T 5000.5-1998 重型机械通用技术条件 有色金属铸件.pdf

JB T 5000.5-2007 重型机械通用技术条件 第5部分 有色金属铸件.pdf

猜你喜欢

ASTM D6615-2014a 9812 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel《喷口B广馏份航空涡轮机燃料的标准规格》.pdf

ASTM D6615-2015 8719 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel《喷射B类宽馏分航空涡轮机燃料的标准规格》.pdf

ASTM D6615-2015a red 1482 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel《喷射B类宽馏分航空涡轮机燃料的标准规格》.pdf

ASTM D6616-2001a(2006) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100&176 C《在摄氏100度时用锥形承载模拟器粘度计测量高剪切速率时粘度的标准试验方法》.pdf

ASTM D6616-2007 346 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100&x00B0 C《在100℃时用锥形承载模拟器粘度计测量高剪切速率时粘度的标准试验方法》.pdf

ASTM D6616-2007(2012) 1875 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100° C《在100摄氏度时用锥形轴承模拟器粘度计测量高剪切率时粘度的标准试验方法》.pdf

ASTM D6616-2017 red 8584 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100&x2009 &xb0 C《在100℃高剪切速率下用锥形轴承模拟器粘度计测量粘度的标准试验.pdf

ASTM D6617-2005 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material《用标准物质的单项试验结果检测实验室偏差的标准实施规程》.pdf

ASTM D6617-2008 752 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material《用标准物质的单项试验结果检测实验室偏差的标准实施规程》.pdf