GOST 28941 22-1991 Flare fittings Stud tees Construction《有管扩口的管路连接 拧入式联通三通接头 结构》.pdf

相关资源

GOST 28941 11-1991 Flare cross straight fittings Construction《有管扩口的四通接头的管路连接 结构》.pdf

GOST 28941 12-1991 Flare fittings Flared conplings Construction《有管扩口的管路连接 管的扩口端 结构》.pdf

GOST 28941 13-1991 Flare fittings Reducing conplings Construction《有管扩口的管路连接 联通管接头 结构》.pdf

GOST 28941 18-1991 Flare fittings Bulkhead conplings Construction《有管扩口的管路连接 隔房间的接头 结构》.pdf

GOST 28941 19-1991 Flare fittings Unequal elbows Construction《有管扩口的管路连接 联通弯头 结构》.pdf

GOST 28941 2-1991 Flare fittings with reducing conplings Construction《有管扩口的转接口的管路连接 结构》.pdf

GOST 28941 25-1991 Flare fittings Snugle plugs Construction《有管扩口的管路连接 无孔丝堵 结构》.pdf

GOST 28941 26-1991 Flare conplings Union nuts Construction《有管扩口的管路连接 活接螺母 结构》.pdf

GOST 28941 27-1991 Flare fittings Sleeves Construction《有管扩口的管路连接 肉丝 结构》.pdf

GOST 28941 28-1991 Flare fittings O-rings Construction《有管扩口的管路连接 密封圈 结构》.pdf

猜你喜欢

ASTM D7557-2009 923 Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens《聚苯乙烯泡沫(EPS)标本采样的标准规范》.pdf

ASTM D7558-2009 6250 Standard Test Method for Colorimetric Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate Thiuram and Mercaptobenzothiazole Ac.pdf

ASTM D7558-2009(2014) 7874 Standard Test Method for Colorimetric Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate Thiuram and Mercaptobenzothiaz.pdf

ASTM D7559 D7559M-2009 3750 Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions《测定充气靠垫压力下降的标准试验方法》.pdf

ASTM D7559 D7559M-2009(2014) 5523 Standard Test Method for Determining Pressure Decay of Inflatable Restraint Cushions《测定充气缓冲垫压力降低的标准试验方法》.pdf

ASTM D7560-2016 6518 Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)《测定水力防侵蚀产品 (HECP) 百分比纤维长度的标准试验方法》.pdf

ASTM D7563-2010 8125 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel《评估机油对水和模拟Ed85燃料的乳化能力的标准试验方法》.pdf

ASTM D7563-2010(2016) 0030 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel《评估机油对乳化水和模拟Ed85燃料能力的标准试验方法》.pdf

ASTM D7564 D7564M-2009 3750 Standard Practice for Construction of Asphalt-Rubber Cape Seal《沥青施工标准规范 橡胶Cape路面》.pdf