GOST R 50778-1995 Loss meters of cable line Types and basic parameters《电缆线损耗电度表 类型和基本参数》.pdf

相关资源

JB T 11047.1-2010 脱硫包 第1部分 基本参数.pdf

JB T 11813.1-2014 纵剪机 第1 部分：型式和基本参数.pdf

JB T 3356-1992 低温液体容器 基本参数.pdf

JB T 6391.1-1992 起重机滑接输电装置 型式和基本参数.pdf

MT 330-1993 XG.XC系列 立井大型多绳箕斗卸载设备基本参数.pdf

MT 331-1993 JL系列 立井大型多绳箕斗基本参数.pdf

GB T 5170.20-2005 电工电子产品环境试验设备 基本参数检定方法 水试验设备.pdf

GB T 5170.21-2008 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台.pdf

GB T 5170.5-1996 电工电子产品环境试验设备基本参数检定方法 湿热试验设备.pdf

CB- 3180-1983 船用离心式泥泵型式与基本参数.pdf

猜你喜欢

ASTM D5996-2016 red 3961 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography《采用在线离子色谱法测定高纯水中阴离子污染物的标准试验方法》.pdf

ASTM D5997-1996(2005) Standard Test Method for On-Line Monitoring of Total Carbon Inorganic Carbon in Water by Ultraviolet Persulfate Oxidation and Membrane Conductivity Detection《.pdf

ASTM D5997-1996(2009) 3750 Standard Test Method for On-Line Monitoring of Total Carbon Inorganic Carbon in Water by Ultraviolet Persulfate Oxidation and Membrane Conductivity Detec.pdf

ASTM D5997-2015 red 1075 Standard Test Method for On-Line Monitoring of Total Carbon Inorganic Carbon in Water by Ultraviolet Persulfate Oxidation and Membrane Conductivity Detecti.pdf

ASTM D5998-2003 Standard Specification for Molded Polyethylene Shipping and Storage Drums《模制聚乙烯装运和储绳卷筒的标准规范》.pdf

ASTM D5998-2010 1875 Standard Specification for Molded Polyethylene Shipping and Storage Drums《模塑聚乙烯运输和储存圆筒标准规范》.pdf

ASTM D5998-2016 8596 Standard Specification for Molded Polyethylene Shipping and Storage Drums《模塑聚乙烯装运和贮存桶的标准规格》.pdf

ASTM D6000 D6000M-2015e1 6666 Standard Guide for Presentation of Water-Level Information from Groundwater Sites《地下水场地水位信息介绍的标准指南》.pdf

ASTM D6000-1996(2002) Standard Guide for Presentation of Water-Level Information From Ground-Water Sites《地下水位点水层信息的标准指南》.pdf