1、A.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 22441 of 2December, 1996March, 1998NAME: URETHANE FOAM FOR CUP HOLDER RETAINERTHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TOCON
2、FIRM THE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC1. SCOPEThe material defined by this specification is a microcellular urethane foam foruse with a plastic cup holder.2. PROPERTIES2.1 Thickness 1.6 0.16 mm2.2 Density 320 kg/m32.3 Compression Set(ASTM D 3574 at 70 oC)10 %
3、 maximum2.4 Hardness 50 5 Shore A2.5 Tensile Strength(ASTM D 3574)1365 kPa minimum50 % minimum2.6 Elongation(ASTM D 3574)2.7 Flammability(GM6090M B4-A)100 mm/min maximum3. APPROVAL, INSPECTION, REJECTIONRefer HN 1000, Clauses A and C4. HAZARDOUS MATERIALSRefer HN 1000, Clause H5. RESTRICTED CHEMICAL
4、SRefer HN 1000, Clause JA.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 22442 of 2December, 1996March, 1998NAME: URETHANE FOAM FOR CUP HOLDER RETAINERTHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TOCONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC6. APPROVED SUPPLIERS AND MATERIALSAPPROVED SUPPLIER APPROVED MATERIALNitto Denko Nitto 2800 Series7. REVISIONSMarch 1998 Addition of the Flammability RequirementPrepared by: Ron Boyack
