1、A.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 22601 of 3March, 1997February, 2000NAME: ADHESIVE - CARPET BONDINGTHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TOCONFIRM THE DOC
2、UMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC1. SCOPEThis specification covers an adhesive tape consisting of a pressure sensitive,rubber based adhesive.1.1 The tape is used for bonding carpet to various interior substrates (ABS,polypropylene etc.). The adhesive provides a good
3、 balance of peel andshear strength.1.2 Types and materials are supplied in the form of a transfer film.1.3 Type material, supplied is a double coated product, has an internalcarrier film which enhances die cutting.2. REQUIREMENTS2.1 Physical and Adhesion Performance Properties, Refer to Table 1.2.1.
4、1 Shelf LifeMaterial shall pass all requirements of this specification after ageingmaterial in the original container for 90 days at 35 oC.2.1.2 Size of ProductShall conform to the following:-Width To be called up on the EngineeringDrawingThickness(ASTM D 3652)Type Type Type Liner Thickness0.28 0.03
5、 mm0.20 0.02 mm0.13 0.02 mm0.13 mmA.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 22602 of 3March, 1997February, 2000NAME: ADHESIVE - CARPET BONDINGTHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIEN
6、T IS RESPONSIBLE TOCONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC2. REQUIREMENTS (continued)2.2 PackagingTape to be supplied in evenly and uniformly wound rolls on suitable coreswith a silicone treated paper, easily removable with no separation ofmaterial.2.3 Othe
7、r tests may be required to validate the specific application.TABLE 1PROPERTIES VALUE TEST METHODColour Amber VisualLiner Removability 60 N/m max ASTM D 3330 90oPeelSolids 99 % min GM9010PMass 0.275 0.05 Kg/m2min180oPeel StrengthAt AmbientAfter 24 hr at 35 oC and 95% RHAfter 17 hr at 82 oC875 N/m min
8、875 N/m min875 N/m minASTM D 3330300 mm/min onpolypropylenePeel 5 minutes afterremoval from the testenvironment.Static Shear Strength.Time to remain bonded to testpanel. Bonded area 645 mm2150 gm weight at 77 oC50 gm weight at 93 oC24 hour min24 hour minASTM D 3654Laminate adhesive tocarpet. Apply t
9、hepolypropylene test panel.Roll twice with 4.5 Kg roller.Allow 72 hour rest atambient.Tear Resistance 6.7 N min ASTM D 1004Tensile Strength 11 N min ASTM D 412 Die AA.C.N. 006 893 232Holden LimitedEngineering DepartmentMATERIAL SPECIFICATIONNUMBERSHEETRELEASEREVISION:HN 22603 of 3March, 1997February
10、, 2000NAME: ADHESIVE - CARPET BONDINGTHIS DOCUMENT MUST NOT BE REPRODUCED. IF USED IN RELATION TOTHE COMPANYS PRODUCTS THE RECIPIENT IS RESPONSIBLE TOCONFIRM THE DOCUMENT ISSUE DATE IS STILL VALID.FORM : I:LABRTORYFORMSTDMATSPEC.DOC3. APPROVAL, INSPECTION AND REJECTIONRefer HN 1000, Clauses A and C.
11、4. HAZARDOUS MATERIALSRefer HN 1000, Clause H.5. RESTRICTED CHEMICALSRefer HN 1000, Clause J.6. APPROVED MATERIALS AND SUPPLIERSAPPROVED MATERIAL APPROVED SUPPLIERType Type Type Fas Tape 1191Fas Tape 1198Fas Tape 1195Avery DenisonAvery DenisonAvery Denison7. REFERENCESASTM D3330 ASTM D3654 ASTM D1004 ASTM D412HN 1000 GM 9010P 8. REVISIONSFebruary, 2000 -Editorial and Formatting corrections.-References section added.Prepared by: Ron Boyack
