ICONTEC 1875-1983 《农业设备，液压气动型喷洒泵》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

GOST 24257-1980 Rhombic throw-away (indexable) carbide cutting inserts with 55 included angle with cylindrical holes and chip-breaking flutes on both faces Design and dimensions《可转.pdf

GOST 24258-1988 Different types of scaffolding General specifications《搭跳板脚手架材料 分类和一般技术要求》.pdf

GOST 24259-1980 Assembling equipment for temporary fastening and adjusting construction buildings Classification and general technical requirements《建筑物结构临时固定和校正用装配设备 分类和一般技术要求》.pdf

GOST 24260-1980 Wood raw material for pirolysis and charring Specifications《干馏和炭化用的木材原料 技术条件》.pdf

GOST 24261-1980 Dentaltechnics Symbols Shapes and dimensions Technical requirements《牙科器械 符号 形状和尺寸 技术要求》.pdf

GOST 24262-1989 Piano General specifications《钢琴 一般技术条件》.pdf

GOST 24263-1980 Medical apparatus Information symbols on the endoscopes and their functional elements Forms and dimensions Technical requirements《医疗器械 内诊镜及其功能元件上的说明符号 形状与尺寸 技术要求》.pdf

GOST 24266-1994 Reducers and motor-reducers shaft ends Basic dimensions allowable torques《减速器与发动机减速器的轴端 基本尺寸、容许扭矩》.pdf

GOST 24267-1980 Plate-blanks of portable press moulds for manufacturing of industrial rubber articles Design and dimensions《橡胶工业制品生产用可卸压模坯板 结构及尺寸》.pdf