HJB 410-2008 Repairing technology requirement for ZJ-9C missile fire control system《ZJ-9C导弹指挥仪修理技术要求》.pdf

相关资源

SF T 0180-2024 法医毒物有机质谱定性分析通则.pdf

SF T 0181-2024 司法鉴定方法验证规范.pdf

SF T 0175-2024 血液和尿液中238种毒（药）物的液相色谱-质谱检验方法.pdf

SF T 0170-2024 涉嫌吸毒人员毛发中毒品检测规范.pdf

SF T 0179-2024 血液中磷化氢及其代谢物的顶空气相色谱-质谱检验方法.pdf

SF T 0183-2024 法医精神病鉴定精神检查规范.pdf

SF T 0182-2024 硅藻检验技术规范 基于人工智能技术的自动化方法.pdf

SF T 0178-2024 血液中溴敌隆等13种抗凝血类杀鼠药的液相色谱-质谱定性定量检验方法.pdf

SF T 0173-2024 血液中碳氧血红蛋白饱和度的双波长分光光度检验方法.pdf

SF T 0166-2024 毛发中安非拉酮等7种减肥药的液相色谱-质谱检验方法.pdf

猜你喜欢

DIN 8000-1962 Design Dimensions and Errors of Hobs for Involute Spur Gears Fundamental Terms《渐开线正齿轮加工用滚铣刀的设计尺寸与误差 基本术语》.pdf

DIN 8002-1955 Metal-cutting Tools Hobs for Spur Gears with Clutch Drive Slot or Keyway Modules 1 to 20《金属切削刀具 带离合器驱动槽或键槽模数为1至20 的正齿轮加工用的滚铣刀 》.pdf

DIN 8010-1963 Carbide Tips for Drills Point Angle 115 for Heavy Loading《钻头用硬质合金刀头 顶角115重载荷》.pdf

DIN 8011-2007 Reamers - Part 2 Technical specifications for shell reamers《铰刀 第2部分 套形铰刀的技术规范》.pdf

DIN 8012-1972 Carbide Inserts for Centre Points《中心点用硬质合金顶尖》.pdf

DIN 8013-1963 Carbide Tips for Drills Point Angle 85 for Light Loading《钻头用硬质合金刀头 顶角85轻载荷》.pdf

DIN 802-3-2016 Tolerances on the threaded portion of taps - Part 3 Ground taps for pipe thread (G) according to DIN EN ISO 228-1 and pipe thread (Rp) according to DIN EN 10226-1 - .pdf

DIN 802-4-2012 Ground thread taps for ISO metric threads of tolerances 7G 8G and special tolerances coarse and fine pitches - Part 4 Manufacturing tolerances on the threaded portio.pdf

DIN 802-5-1997 en 8469 Tolerances on the threaded portion of tape - Part 5 Ground threaded taps for ISO metric thread threads for interference fits according to DIN 8141-1 coarse a.pdf