IRAM PROYECTO DE NORMA 106-P -1944 《金属材料嵌入型试件抗冲击弯曲的试验方法》.pdf

相关资源

JIS Z 2201-1998 中文版 金属材料拉伸试验.pdf

JIS Z 2201-1998 英文版 金属材料抗拉试验用试样.pdf

JIS Z 2242-2005 金属材料冲击试验方法.pdf

JIS Z 2254-2008 中文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 2254-2008 英文版 薄板金属材料的塑性变形比试验方法.pdf

JIS Z 3422-1-2003 金属材料焊接程序规范及认可.焊接程序试验.第1部分钢的电弧焊及气焊和镍及镍合金的电弧焊.pdf

JIS Z3420-2003 金属材料焊接过程的规范及认可.总则 Specification and approval of welding procedures for metallic materials -- Welding procedure specification for arc welding.pdf

JIS G0564-1999 金属材料.平面应变断裂强度的测定.pdf

JIS H7503-2003 超塑变形金属材料孔穴体积百分率的测量方法.pdf

YB T 5293-2006 金属材料.顶锻试验方法.pdf

猜你喜欢

GOST 26606-1985 Fibre-covered plastic-covered film-covered and enamelled fiber covered magned wire General specifications《瓷漆-纤维 纤维 塑料 薄膜绝缘绕组线 一般技术条件》.pdf

GOST 26607-1985 System of ensuring of geometrical parameters accuracy in construction Functional tolerances《保证建筑工程几保精度的体系 实用公差》.pdf

GOST 26608-1985 Blocks of two-kassette press moulds for producing the rubber technical parts on presses with heating plates dimensions 800x800 mm Design and dimensions《800×800mm加热板.pdf

GOST 26609-1985 Blocks of three-cassette press moulds for producing the rubber technical parts on presses with heating plates dimensions 800x800 mm Design and dimensions《800×800mm加.pdf

GOST 26611-1985 Straigh luming undercutting and coping tool holders with clamped changeable inserts pressed from the top Desing and dimensions《机械夹固式多刃刀片外圆车刀 结构及尺寸》.pdf

GOST 26612-1985 Boring tools with clamped shangeable inserts pressed from the top Design and dimensions《机械夹固式多刃刀片镗刀 结构及尺寸》.pdf

GOST 26614-1985 Powder antifriction materials Test method for determination of tribotechnical properties《抗磨粉末材料 磨擦技术性能测定法》.pdf

GOST 26615-1985 Enamelled winding wires Specifications《漆包绕组线 一般技术条件》.pdf

GOST 26616-1985 Sets of portable multi-impression press moulas for manufacturing of rubber u-packing seals Design and dimensions《制造液压装置皮碗用的可卸下的多位压模 结构及尺寸》.pdf