JUS G C1 300-1982 Plastics Polyetilene for pipes and fittings Clasification and quality requirement《塑料 管道和配件用聚乙烯 分类和质量要求》.pdf

相关资源

JIS K7034-2003 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.在偏移条件下内截面耐化学侵蚀的测定.pdf

JIS K7039-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道.在潮湿条件下长期最终弯曲应力的测定和长期最终相应环偏移度的计算.pdf

JIS K7042-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道和配件.粘合的或绕接的钢性接头设计的检定试验方法.pdf

JIS K7035-1998 塑料管道系统.玻璃纤维增强热固性塑料(GRP)管道.在潮湿条件下蠕变因子的测定和长期特定环硬度的计算.pdf

JIS K7031 2003 塑料管道系统.玻璃增强热塑(GRP)管道和配件.在短期内压下管壁的渗透密封性验证试验方法.pdf

GA 304-2012 塑料管道阻火圈.pdf

CJJ T 29-2010 建筑排水塑料管道工程技术规程.pdf

YD 5025-1996 长途通信光缆塑料管道工程设计暂行技术规定.pdf

CJJ T 29-2010 建筑排水塑料管道工程技术规程.pdf

QB T 2568-2002 硬聚氯乙烯（PVC-U）塑料管道系统用溶剂型胶粘剂.pdf

猜你喜欢

JIS C0095-1995 Background information, Section One-Cold and dry heat tests.pdf

JIS C0096-2001 Environmental testing-Part2：Test methods-Test Cx：Damp heat, steady state (unsaturated pressurized vapour).pdf

JIS C0097-2001 Environmental testing-Part2：Tests-Test Cy：Damp heat, steady state, accelerated test primarily intended for components.pdf

JIS C0098-2002 Environmental testing-Electrotechnical products-Dust and sand test.pdf

JIS C0099-2005 Environmental testing：Tests-Test：Test methods for solderability of surface mounting devices (SMD) by wetting balance using lead-free solder paste.pdf

JIS C0110-1995 Classification of environmental conditions Part 1：Classification of environmental parameters and their severities.pdf

JIS C0111-1995 Classification of environmental conditions Part 2-Environmental conditions appearing in nature Temperature and humidity.pdf

JIS C0112-1995 环境条件的分类.第3部分环境参数组及其严酷程度的分类.介绍.pdf

JIS C0113-1996 环境条件的分类.第2部分自然环境条件.降雨和风.pdf