JUS G S2 140-1985 Rubber and plastics hoses Assessment of ozone resistance under static conditions《橡胶和塑料软管 静止条件下抗臭氧性的评估》.pdf

相关资源

JIS K6330-1-2003 橡胶和塑料软管的测试方法.第1部分软管和软管组件尺寸的测量方法.pdf

JIS K6330-10-1998 橡胶和塑料软管的试验方法.第10部分通过软管壁对液体传输进行的测定.pdf

JIS K6330-2-1998 橡胶和塑料软管的测试方法.第2部分液体静力法.pdf

JIS K6330-8-1998 橡胶和塑料软管的试验方法.第8部分无收缩的液压脉冲试验.pdf

JIS K6330-9-2003 橡胶和塑料软管的测试方法.第9部分软管和管件的弯曲性能.pdf

JIS K6375-1999 塑料软管和软管组件.液压型织物增强的热塑性塑料.规范.pdf

JIS K6330-3-1998 橡胶和塑料软管的测试方法.第2部分抽吸阻力的测定.pdf

JIS K6330-4-2003 橡胶和塑料软管的测试方法.第4部分低于室温的弯曲试验.pdf

JIS K6330-5-1998 橡胶和塑料软管的试验方法.第5部分电阻的测定.pdf

JIS K6330-6-1998 橡胶和塑料软管的测试方法.第6部分部件间附着力的测定.pdf

猜你喜欢

FORD ESK-M2G299-A3-2009 ADHESIVE SEALER SYNTHETIC RUBBER HOT APPLIED 70 - 80 DEGREE C HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热固化70-80℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M99P111.pdf

FORD ESK-M2G299-A4-2009 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 30 - 60 DEGREE C HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热固化30-60℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M99P11.pdf

FORD ESK-M2G299-A5-2009 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 60 - 70 DEGREE C HEAT CURING TO BE USED WITH FORD WSS-M99P1111-A 《热固化60-70℃热施涂合成橡胶密封剂胶粘剂 与标准FORD WSS-M99P11.pdf

FORD ESK-M2G299-A6-2009 ADHESIVE SEALER SYNTHETIC RUBBER WARM APPLIED 60 - 70 DEGREE C HEAT CURING LONG TERM FLEXIBLE TO BE USED WITH FORD WSS-M99P1111-A 《能长期保持柔性的热固化60-70℃热施涂合成橡.pdf

FORD ESK-M2G318-A1-1988 ADHESIVE POLYESTER - HOT MELT《热熔聚酯胶粘剂》.pdf

FORD ESK-M2G340-A-2015 ADHESIVE POLYCHLOROPRENE CONTACT WATER DISPERSION AIR DRYING TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G365-A1-2015 ADHESIVE POLYURETHANE TWO COMPONENT SOLVENT FREE METAL TO E-COATED METAL POLYOL PART TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G365-A2-2015 ADHESIVE POLYURETHANE TWO COMPONENT SOLVENT FREE METAL TO E-COATED METAL ISOCYANATE COMPONENT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD ESK-M2G367-A1-2015 ADHESIVE POLYURETHANE TWO COMPONENT WATER BORNE BASE MATERIAL TO BE USED WITH FORD WSS-M99P1111-A .pdf