JUS K T2 051-1980 One-side vernier callipers reading to 0 1 and 0 05 mm《精确到0 1和0 05毫米的单面游标卡尺》.pdf

相关资源

HB 2074-1989 内孔空刀槽径用游标卡尺（B=6~100mm）.pdf

HB 2075-1989 内孔空刀槽径用游标卡尺.pdf

HB 2076-1989 倒角游标卡尺 α=30°、45°.pdf

HB 3556-1985 高度游标卡尺技术条件.pdf

HB 3557-1985 高度游标卡尺检定规程.pdf

HB 3558-1985 高度游标卡尺.pdf

HB 3559-1985 高度游标卡尺.pdf

HB 4206-1989 壁厚游标卡尺.pdf

HB 4207-1989 内孔空刀槽径用游标卡尺.pdf

HB 4497-1990 游标卡尺质量分等规定.pdf

猜你喜欢

DL T 1425-2015 The technical codes of anti-corrosion protection for metallic material in the transformer substation《变电站金属材料腐蚀防护技术导则》.pdf

DL T 1426-2015 Steam turbines in combined cycles performance test codes《联合循环汽轮机性能试验规程》.pdf

DL T 1427-2015 Gas turbine heat recovery steam generators performance test codes《联合循环佘热锅炉性能试验规程》.pdf

DL T 1428-2015 Acceptance guide for direct air-cooled system《直接空冷系统验收导则》.pdf

DL T 1429-2015 Specification for power station pulverized coal fired boilers《电站煤粉锅炉技术条件》.pdf

DL T 1430-2015 Technical guide for on-line monitoring system of transformation equipment《变电设备在线监测系统技术导则》.pdf

DL T 1431-2015 Standard test method for coulometric determination of carbon dioxide liberated by hydrochloric acid in coal fly ash and bottom ash《煤(飞灰、渣)中碳酸盐二氧化碳的测定 盐酸分解-库仑滴定法》.pdf

DL T 1432 1-2015 Testing specification for on-line monitoring device of transformation equipment Part 1 General testing specification《变电设备在线监测装置检验规范 第1部分 通用检验规范》.pdf

DL T 1432 3-2016 Testing specification for on-line monitoring device of transformation equipment Part 3 On-line insulation monitoring device of capacitive equipment and metal-oxide.pdf