JUS L G1 003-1994 Direct acting indicating analogue electrical measuring instruments and their accessories - Special requirements for wattmeters and varmeters《直接作用指示模拟电子测量仪器及配件 电力计.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C1366-2004(2013) Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures《高温下高级陶瓷抗拉强度的标准试验方法》.pdf

ASTM C1367-2006 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures《密封件升温状态下静载阻力的标准试验方法》.pdf

ASTM C1367-2006(2012) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures《密封件升温状态下静载阻力的标准试验方法》.pdf

ASTM C1368-2006 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature《利用室温下用常应.pdf

ASTM C1368-2010 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature《环境温度下通过恒.pdf

ASTM C1368-2010(2017) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature《通过.pdf

ASTM C1368-2018 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature《通过室温恒压力强.pdf

ASTM C1369-2007 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units《釉面结构绝缘玻璃元件的二级边缘密封剂用标准规范》.pdf

ASTM C1369-2007(2014) Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units《釉面结构绝缘玻璃件的二级边缘密封剂的标准规格》.pdf