JUS M L2 170-1994 Agr icultural and forestry wheeled tractors - Controls《农用和林场用轮式拖拉机 控制》.pdf

相关资源

JIS D6701-1986 农业用轮式拖拉机规范的标准格式.pdf

JIS D6703-1994 农业轮式拖拉机三点固定联动装置的尺寸.pdf

JIS D6705-1984 农业轮式拖拉机环形牵引杆的尺寸.pdf

JIS D6709-1984 农业轮式拖拉机车轮装配于轮毂上的尺寸.pdf

JB T 11318-2013 单缸直联传动轮式拖拉机 通用技术条件.pdf

JB T 11673-2013 轮式拖拉机前驱动桥传动试验方法及评价指标.pdf

JB T 11892-2014 轮式拖拉机液压转向用恒流泵 技术条件.pdf

JB T 10495-2005 皮带传动轮式拖拉机 通用技术条件.pdf

JB T 10652-2006 轮式拖拉机轮毂螺栓、车轮螺钉和螺母技术条件.pdf

JB T 10834-2008 带前装载和后挖掘装置的轮式拖拉机静态稳定性试验方法.pdf

猜你喜欢

GOST 25915-1988 Forging machines and rolls Series of main parameters《锻压机和辊锻机 主要参数系列》.pdf

GOST 25917-1983 Lasers Methods for measurement of relative distribution of radiant energy (power)《激光器 辐射能量（功率）密度相对分布的测量方法》.pdf

GOST 25918-1983 Continuous-wave lasers Methods for measurement of radiation frequency instability《连续工作的激光器 辐射频率不稳定性的测量方法》.pdf

GOST 25919-1983 Sheet stamping dies Die sets with intermediate plate with four guide sliding assemblies Design and dimensions《板材冲压模 具有四个滑动导向部件的带中间板的冲压模组件 结构及尺寸》.pdf

GOST 25920-1983 Sheet stamping dies Intermediate plates-blanks for dies with four guide sliding assemblies Design and dimensions《板材冲压用模 具有四个滑动导向部件的冲压模用中间板一坯 结构及尺寸》.pdf

GOST 25921-1983 Paper tape for graphic devices of computers Specifications《计算机图示设备用纸带 技术条件》.pdf

GOST 25922-1983 Electrical insulating materials Determination of stiffness Methods of test《绝缘材料 硬度测定法》.pdf

GOST 25923-1989 Butterfly control valves Basic parameters《盘式调节阀 基本参数》.pdf

GOST 25926-1990 Radionuclide ionising radiation sealed sources Purability classes and test methods Norms of degrees of rigidity under climatic and mechanical influences《封闭式放射性核素电离辐.pdf