MI 18783-1979 《公司质量保证》.pdf

相关资源

CB T 3971-2005 船舶涂装质量保证及缺陷分级.pdf

DL T 972-2005 带电作业工具、装置和设备的质量保证导则.pdf

CJ T 37-1999 液化石油气钢瓶质量保证控制要点.pdf

HB 6466-1990 软件质量保证计划编制规定.pdf

DL T 1026-2006 核电厂非核级设备维修质量保证.pdf

HB 7233-1995 民用机载计算机软件质量保证大纲编写指南.pdf

HB 7663-1999 民用航空产品供应商质量保证能力评价程序.pdf

HG 20557.3-1993 工艺系统设计管理规定 工艺系统专业工程设计质量保证程序.pdf

HG T 20701.4-2000 容器、换热器专业设计质量保证程序.pdf

HG T 20702.4-2000 特殊设备专业设计质量保证程序.pdf

猜你喜欢

GOST 17756-1972 Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm Design and basic dimensions《直径为1-100 mm的具有全螺纹插件的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17757-1972 Threaded plug-gauges with inserts with incomplete form of thread of diameters from 1 to 100 mm Design and basic dimensions《直径为1-100 mm的具有不完整螺纹插件的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17758-1972 Double-ended threaded plug-gauges with inserts of diameters from 2 to 50 mm Design and basic dimensions《直径2mm～50mm带镶块双头螺纹塞规 结构及基本尺寸》.pdf

GOST 17759-1972 Threaded plug-gauges with full form of thread of diameters from 52 to 100 mm Design and basic dimensions《直径为52-100 mm的具有全螺纹的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17760-1972 Threaded plug-gauges with incomplete form of thread of diameters from 52 to 100 mm Design and basic dimensions《直径为52-100 mm的具有不完整螺纹的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17761-1972 Threaded plug-gauges with full of thread of diameter from 105 to 300 mm Design and basic dimensions《直径为105-300 mm的具有全螺纹的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17762-1972 Threaded plug-gauges with incomplete form of thread of diameters from 105 to 300 mm Design and basic dimensions《直径105mm～300mm带短牙型螺纹的螺纹塞规 结构及基本尺寸》.pdf

GOST 17763-1972 Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm Design and basic dimensions《直径为1-100 mm的具有全螺纹的螺纹塞规 设计和基本尺寸规格》.pdf

GOST 17764-1972 Threaded ring-gauges with incomplete form of thread of diameters from 2 to 100 mm Design and basic dimensions《直径为2-100 mm的具有不完整螺纹的螺纹环规 设计和基本尺寸规格》.pdf