MS 1004-1986 METHODS OF CHEMICAL ANALYSIS OF SOFT SOLDER《软焊料钎化学分析方法焊》.pdf

相关资源

JIS G1602-1998 铁合金化学分析取样方法(第2部分钨铁、钼铁、钒铁、钛铁和铌铁合金).pdf

JIS G1603-1985 合金化学分析的取样方法(第3部分 磷铁、金属锰、金属硅、金属铬、硅钙及硼铁合金).pdf

JIS H6202-1986 化学分析用铂蒸发器.pdf

JIS G1326-2000 镍铁化学分析方法-解释.pdf

JIS G1301-1987 铁合金化学分析方法通则.pdf

JIS G1320-1968 磷铁化学分析方法.pdf

JIS H6201-1986 化学分析用铂坩埚.pdf

JIS H1012-2001 铜及铜合金的化学分析方法通则.pdf

JIS H1402-2001 钨粉及碳化钨粉的化学分析方法.pdf

JIS H1402-2006 钨粉及碳化钨粉的化学分析方法(修改件1).pdf

猜你喜欢

FORD WSK-M4D697-A2-2008 ABS POLYCARBONATE BLEND (ABS+PC) HIGH IMPACT STRENGTH HIGH HEAT MOLDING COMPOUND INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSK-M4D697-A1.pdf

FORD WSK-M4D697-A3-2008 ABS + POLYCARBONATE BLEND (ABS+PC) HIGH IMPACT STRENGTH HIGH HEAT MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《丙烯腈-丁二烯-苯乙烯(ABS)+聚碳酸酯(ABS.pdf

FORD WSK-M4D698-A-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 33 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度为33 D的热塑性聚烯烃(TPO)弹性体成型料 与标准FORD W.pdf

FORD WSK-M4D698-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 33 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D492-B2)《硬度为33 D的热塑性聚烯径(T.pdf

FORD WSK-M4D698-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 50 DUROMETER D HARDNESS MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《硬度为50 D的热塑性聚烯径(TEO)弹性体成型料 与标准FORD .pdf

FORD WSK-M4D699-A-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 30% CALCIUM CARBONATE FILLED TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D911-B)《30%碳酸钙填充的热塑性聚烯烃(TPO)弹性体 与标准FO.pdf

FORD WSK-M4D700-A-1991 POLYAMIDE (PA) 11 FLEXIBLE HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND《聚酰胺11柔性、受热稳定的模塑和挤塑成型料》.pdf

FORD WSK-M4D701-A-2005 POLYAMIDE (PA) 12 FLEXIBLE HEAT STABILIZED MOLDING AND EXTRUSION COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《柔性、受热稳定的聚酰胺12模塑和挤塑成型料 与标准FORD WSS-M99P1111-.pdf

FORD WSK-M4D702-A-2012 ACETAL (POM) COPOLYMER MINERAL OIL IMPREGNATED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《乙缩醛(POM)共聚物 矿物油浸渍的模塑材料 与福特WSS-M99P1111-A 一起使用》.pdf