MSZ 54-1981 《手动活动型链条提升设备》.pdf

相关资源

MSZ 6706-1980 《手动驱动链条式提升》.pdf

STAS 1528-1968 《用于牵引和提升的带焊链工业用链条 带焊链的常用链条 常规条件》.pdf

ICONTEC 1485-1979 《用于装载提升的非校准钢制链条，短链环》.pdf

ICONTEC 1307-1977 《用于装载提升的非校准钢制链条（短链环）》.pdf

MSZ 6708-1980 《手动驱动链条式提升机检测》.pdf

ICONTEC 1795-1982 《机械产品，用于提升设备当中的400型短链环校准链条》.pdf

MNOSZ 5504-1952 《工业链条制品 链条头》.pdf

MSZ 5513-1963 《驱动链条以及内道普通链条用于摩托车链条》.pdf

MSZ 5512-1963 《工业链条 长形圆孔焊接链条》.pdf

猜你喜欢

ASTM F2326-2004(2015) Standard Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn《收集和分析蜡烛燃烧时发出的可见排放的标准试验方法》.pdf

ASTM F2327-2003 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water《水中油检测和监测用空中远程感应系统的选择用标准指南》.pdf

ASTM F2327-2008 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water《水中油检测和监测用空中远程感应系统的选择用标准指南》.pdf

ASTM F2327-2015 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water《用于监测和监视水上油的机载遥感系统选择的标准指南》.pdf

ASTM F2328-2005 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs《淬火和回火的螺纹钢螺栓、螺母和螺柱的脱碳和渗碳性测定的标准试.pdf

ASTM F2328-2005(2011) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs《测定硬化和回火螺纹钢螺栓 螺钉和螺柱螺栓的脱碳和.pdf

ASTM F2328-2014 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws Studs and Nuts《淬火和回火的螺纹钢螺栓 螺钉 螺柱和螺母的脱碳和渗.pdf

ASTM F2328-2017 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws Studs and Nuts《淬火和回火的螺纹钢螺栓 螺钉 螺柱和螺母的脱碳和渗.pdf

ASTM F2328M-2007 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts Screws and Studs [Metric]《淬火和回火的螺纹钢螺栓、螺钉和螺柱的脱碳.pdf