MSZ 5507-1959 《槽式驱动链条》.pdf

相关资源

MSZ 6706-1980 《手动驱动链条式提升》.pdf

MSZ 6708-1980 《手动驱动链条式提升机检测》.pdf

MSZ 5507-1988 《槽式驱动链条》.pdf

MSZ 5513-1963 《驱动链条以及内道普通链条用于摩托车链条》.pdf

MSZ 5508-1983 《滚动以及槽式驱动链条》.pdf

GOST 28281-1989 Disk cutters for sprockets off transmission roller and bush chains Specifications《切削滚柱和滚套驱动链条用星状齿的盘铣刀 技术条件》.pdf

猜你喜欢

DIN 1212-2-2003 Step irons with upstand for staggered manhole steps - Part 2 Precast concrete manhole step irons《人孔直立错列阶梯脚扣 第2部分 浇入混凝土预制件的阶梯脚扣》.pdf

DIN 1212-3-2010 Step irons with upstand for staggered manhole steps - Part 3 Bolted-on step irons《错列人孔梯用直立式阶梯脚扣 第3部分 螺栓连接的阶梯脚扣》.pdf

DIN 1221-1992 Dirt trap for manhole covers《人孔盖的挡渣器》.pdf

DIN 12214-1996 Laboratory glassware - Glass tube ends and covers with laboratory flat flange - Dimensions requirements《实验室玻璃仪器 带实验室扁法兰的玻璃管末端和盖 尺寸、要求》.pdf

DIN 12215-1975 Laboratory glassware glass tube ends for hose connections olives capillary tube ends《玻璃实验仪器 软管连接用玻璃管端 橄榄形和毛细管端》.pdf

DIN 12216-1975 Laboratory glassware glass tube ends with round thread《实验室玻璃仪器 带圆螺纹的玻璃管端》.pdf

DIN 12217-2002 Laboratory glassware - Tubes made of borosilicate glass 3 3《实验室玻璃器皿 硼硅酸盐3 3玻璃管》.pdf

DIN 12242-1-1980 Laboratory glassware interchangeable conical ground joints dimensions tolerances《实验室玻璃器皿 可互换的锥形磨口尺寸和公差》.pdf

DIN 12244-1-1979 Laboratory glassware interchangeable spherical ground joints《实验室玻璃仪器 可互换球形磨口》.pdf