MSZ 7474-1962 《机床液压设备，液压控制设备零件的额定直径》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS EN ISO 2419-2012 Leather Physical and mechanical tests Sample preparation and conditioning《皮革 物理和机械试验 样品制备和调理》.pdf

BS EN ISO 2420-2017 Leather Physical and mechanical tests Determination of apparent density and mass per unit area《皮革 物理和机械试验 单位面积表观密度和质量的测定》.pdf

BS EN ISO 2431-2011 Paints and varnishes Determination of flow time by use of flow cups《色漆和清漆 用流量杯测定流量时间》.pdf

BS EN ISO 2439-2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique)《软质泡沫聚合物材料 硬度的测定(压痕技术)》.pdf

BS EN ISO 2450-2008 Cream - Determination of fat content - Gravimetric method (Reference method)《奶油 脂肪含量的测定 重量分析法(参考法)》.pdf

BS EN ISO 2503-2009 Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding cutting and allied processes up.pdf

BS EN ISO 2505-2005 Thermoplastics pipes - Longitudinal reversion - Test methods and parameters《热塑性管 纵向回缩 试验方法和参数》.pdf

BS EN ISO 252-2007 Conveyor belts - Adhesion between constitutive elements - Test methods《输送带 结构元件间的粘附 试验方法》.pdf

BS EN ISO 2535-2002 Plastics - Unsaturated polyester resins - Measurement of gel time at ambient temperature《塑料 不饱和聚酯树脂 室温条件下胶凝时间的测量》.pdf