MSZ 8845-1963 《墙上的烟道零件》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSK-M4D727-A-2008 POLYBUTYLENE TEREPHTHALATE (PBT) 20% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《20%强化玻璃纤维模制物料的聚对苯二甲酸丁二醇酯(PBT)(与FORD WSS-M.pdf

FORD WSK-M4D729-A1-2010 POLYPROPYLENE (PP) HOMOPOLYMER 20% MINERAL FILLED MELT FLOW RATE 1 5 - 4 0 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为1 5-4 0的20%矿物填充的聚丙烯(PP)均聚物 与标准FORD.pdf

FORD WSK-M4D729-A2-2010 POLYPROPYLENE (PP) HOMOPOLYMER 20% MINERAL FILLED MELT FLOW RATE 12 - 22 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为12-22的20%矿物填充的聚丙烯(PP)均聚物 与标准FORD WSS.pdf

FORD WSK-M4D730-A-2010 POLYPROPYLENE (PP) HOMOPOLYMER 25% MINERAL FILLED MELT FLOW RATE 22 - 30 TO BE USED WITH FORD WSS-M99P1111-A 《熔体流动速率为22-30的25%矿物填充的的聚丙烯(PP)均聚物成型料 与标准FORD .pdf

FORD WSK-M4D731-A1-2011 POLYPROPYLENE (PP) HOMOPOLYMER 20% GLASS FIBER REINFORCED MELT FLOW RATE 1 0 - 3 0 TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃纤维加强 熔态流动率为1 0-3 0的聚丙烯(PP)均聚物.pdf

FORD WSK-M4D731-A2-2011 POLYPROPYLENE (PP) HOMOPOLYMER 20% GLASS FIBER REINFORCED MELT FLOW RATE 10 - 18 TO BE USED WITH FORD WSS-M99P1111-A 《20%玻璃纤维加强 熔态流动率为10-18的聚丙烯(PP)均聚物 与福.pdf

FORD WSK-M4D732-A1-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MELT FLOW RATE 0 5 - 4 0 TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D732-A2-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER REINFORCED MELT FLOW RATE 10 - 18 TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSK-M4D737-A2-2010 POLYBUTYLENE TEREPHTHALATE (PBT) MODIFIED 30% GLASS FIBER REINFORCED MOLDING COMPOUND EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《汽车外部用30%玻璃纤维增强的聚对苯二甲酸丁.pdf