MSZ 15958 1-1987 《提前生产的金属混凝土敞开式产品 质量检测》.pdf

相关资源

JB T 56080-1994 大中型水电机组自动化元件 产品质量分等.pdf

JB T 56082-1996 汽轮发电机产品质量分等.pdf

JB T 56084-1996 汽轮发电机氢油水系统控制设备产品质量分等.pdf

JB T 56153-1999 试验变压器 产品质量分等.pdf

JB T 56155-1999 有载分接开关 产品质量分等.pdf

JB T 56178-1999 定子线圈中张形机.产品质量分等.pdf

JB T 56179-1999 冲槽机.产品质量分等.pdf

JB T 56180-1999 防爆电器 产品质量分等.pdf

JB T 56182-1994 中小型水轮机 产品质量分等.pdf

JT T 952-2014 海事测绘产品质量评定方法及要求.pdf

猜你喜欢

ASTM D2261-2013(2017)e1 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)《利用切口(单幅撕裂)法(恒.pdf

ASTM D2265-2006 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range《超宽温度范围润滑脂滴点的标准试验方法》.pdf

ASTM D2265-2006(2014) Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range《超宽温度范围润滑脂滴点的标准试验方法》.pdf

ASTM D2265-2015 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range《超宽温度范围润滑脂滴点的标准试验方法》.pdf

ASTM D2265-2015e1 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range《宽温度范围润滑脂滴点的标准试验方法》.pdf

ASTM D2266-2001 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)《润滑脂耐磨特性的标准试验方法(四球法)》.pdf

ASTM D2266-2001(2008) Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)《润滑脂耐磨特性的标准试验方法(四球法)》.pdf

ASTM D2266-2001(2015) Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)《润滑脂耐磨特性的标准试验方法 (四球法)》.pdf

ASTM D2268-1993(2003)e1 Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography《用毛细管气相色谱法分析高纯度n-庚烷和异辛烷的标准试验方法》.pdf