MSZ 21866 1-1979 《汽车发动机空气设备检测》.pdf

相关资源

JASO E110-1992 汽车发动机同步带试验方法.pdf

JASO B203-1990 英文版 汽车发动机罩锁扣系统代码.pdf

JIS D3105-1992 汽车发动机用气缸盖密封垫.pdf

JIS D3106-1988 汽车发动机用套筒式半滑动轴承.pdf

JIS D1613-1996 汽车发动机.化油器.试验方法.pdf

JIS D3102-1987 汽车发动机用半轴.pdf

JIS D3103-1989 汽车发动机用汽缸套.pdf

JIS D3104-1996 汽车发动机.活塞.pdf

JB T 10859-2008 滚动轴承 汽车发动机张紧轮和惰轮轴承及其单元.pdf

JB T 6651-1993 微型汽车发动机同步带传动 粉末冶金正时带轮.pdf

猜你喜欢

GOST 13104-1977 Leather raw material Determination of net mass and mass variation due to salting《制革原料 腌透性及净重测定法》.pdf

GOST 13105-1977 Leather raw material Methods of determination of the conservation components《制革原料 储存用的组份测定法》.pdf

GOST 13106-1967 Raw hides Histological and bacteriological control《生皮 组织和细菌控制》.pdf

GOST 13107-1979 Devices for speech reception and transmission Methods of measuring acoustic noeses《语言接收和传输装置 噪声测量方法》.pdf

GOST 13110-1983 Sheet stamping dies Lower plates-blanks for dies with diagonally positioned guide assemblies Construction and dimensions《带对角导柱和衬套的板材冲模用下料板 结构及尺寸》.pdf

GOST 13111-1983 Sheet stamping dies Upper plastic-blanks for dies with diagonally positioned guide assemdlies Design and dimensions《带对角导柱和衬套的板材冲模用上料板 结构及尺寸》.pdf

GOST 13112-1983 Die bases for cold plastic working dies with guide posts rear located Construction and dimensions《带后导柱和衬套的板材冲模用料板 结构及尺寸》.pdf

GOST 13113-1983 Die bases for cold plastic working dies with guide posts located on central line Construction and dimensions《带中间导柱和衬套的板材冲模用料板 结构及尺寸》.pdf

GOST 13114-1975 Die plate without shelves for cold plastic working dies Construction and dimensions《板材冲模用无托架料板 结构及尺寸》.pdf