MSZ KGST 1770-1979 《硬纸板磨片的硬度测定》.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

FORD WSS-M33J11-B1-2017 ENAMEL (2 WET) HIGH SOLIDS THERMOSET STRAIGHT SHADE (NON-METALLIC) MONOCOAT PROCESSED WITH WSS-M33J10-B1 REDUCED VISCOSITY EXTERIOR TO BE USED WITH FORD WS.pdf

FORD WSS-M33J12-A1-2014 ENAMEL WATERBORNE (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET PRIMER PROCESSED WITH WSS-M33J12-A2 WSS-M33J12-A4 EXTERIOR TO BE USED WITH FORD WSS-M99P111.pdf

FORD WSS-M33J12-A2-2014 ENAMEL WATERBORNE (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET BASECOAT PROCESSED WITH WSS-M33J12-A1 WSS-M33J12-A4 EXTERIOR TO BE USED WITH FORD WSS-M99P11.pdf

FORD WSS-M33J12-A3-2014 ENAMEL WATERBORNE (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET MIDCOAT PROCESSED WITH WSS-M33J12-A1 WSS-M33J12-A2 WSS-M33J12-A4 EXTERIOR TO BE USED WITH FO.pdf

FORD WSS-M33J12-A4-2014 ENAMEL 2-COMPONENT URETHANE (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET CLEARCOAT PROCESSED WITH WSS-M33J12-A1 WSS-M33J12-A2 EXTERIOR CCOMPOSED OF WSS-M33J.pdf

FORD WSS-M33J12-A5-2014 ENAMEL 2-COMPONENT URETHANE (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET TINTED CLEARCOAT PROCESSED WITH WSS-M33J12-A1 WSS-M33J12-A2 EXTERIOR CCOMPOSED OF W.pdf

FORD WSS-M33J12-A6-2014 ENAMEL WATERBORNE (3 WET) COMPLIANCE VOC HIGH SOLIDS THERMOSET MIDCOAT PROCESSED WITH WSS-M33J12-A1 WSS-M33J12-A2 WSS-M33J12-A4 EXTERIOR TO BE USED WITH FO.pdf

FORD WSS-M33J12-A7-2014 PART B - ISO COMPONENT (3WET) COMPLIANCE VOC PROCESSED WITH WSS-M33J12-A6 TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M33J12-A1).pdf

FORD WSS-M33J3-D1-2012 ENAMEL COMPLIANCE VOC HIGH SOLIDS THERMOSET BASECOAT BASECOAT CLEARCOAT WET-ON-WET PROCESS EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A 《外部挥发性高固体热固化底漆层 经过底.pdf