（贵阳专版）2019年中考化学总复习第1编主题复习模块1身边的化学物质课时6金属的化学性质（精练）课件.ppt

相关资源

JIS C0950-2005 英文版 电子及电气设备特定化学物质 RoHS标示.pdf

JIS T8031-2010 液态化学物质防护服.加压下测定防护服材料抗液体渗透性.pdf

HJ T 154-2004 新化学物质危害评估导则.pdf

HJ T 420-2008 新化学物质申报类名编制导则.pdf

GBZ T 210.4-2008 职业卫生标准制定指南 第4部分：工作场所空气中化学物质的测定方法.pdf

GBZ T 210.5-2008 职业卫生标准制定指南 第5部分：生物材料中化学物质的测定方法.pdf

GB T 23462-2009 防护服装 化学物质渗透试验方法.pdf

GBZ T 210.1-2008 职业卫生标准制定指南 第1部分：工作场所化学物质职业接触限值.pdf

GB T 23462-2009 防护服装.化学物质渗透试验方法.pdf

NB SH T 0859-2013 化学物质热稳定性的测定 热分析法.pdf

猜你喜欢

FORD WSS-M4D940-A1-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 40% GLASS FIBER REINFORCED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%玻璃纤维增强的热塑性聚烯径(TEO)弹性体成型料 与标准.pdf

FORD WSS-M4D940-A2-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 18% GLASS FIBER REINFORCED HIGH IMPACT LOW GLOSS UV STABILIZED MOLDED IN COLOR INTERIOR TO BE USED WITH FORD WSS-M.pdf

FORD WSS-M4D940-A3-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 25% GLASS FIBER REINFORCED HIGH IMPACT HIGH SCRATCH RESISTANCE LOW GLOSS UV STABILIZED MOLDED IN COLOR INTERIOR TO.pdf

FORD WSS-M4D941-A1-2012 POLYPROPYLENE (PP) HOMOPOLYMER 30% GLASS FIBER MICA REINFORCED MOLDING COMPOUND LUBRICATED AND HEAT STABILIZED WITH 25% MINIMUM RECYCLED CONTENT TO BE USED.pdf

FORD WSS-M4D943-A1-2010 POLYPHTHALAMIDE + POLYPROPYLENE (PPA+PP) BLEND MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《聚邻苯二甲酰胺+聚丙烯（PP）混合物成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSS-M4D944-A1-2006 POLYPROPLENE (PP) HOMOPOLYMER 50% BARIUM SULFATE FILLED 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《再生料含量最低25%的50%硫.pdf

FORD WSS-M4D945-A1-1996 POLYPROPYLENE (PP) HOMOPOLYMER 25 % CALCIUM CARBONATE FILLED MOLDING COMPOUND《25%碳酸钙填充的聚丙烯（PP）均聚物成型料》.pdf

FORD WSS-M4D947-A1-2010 POLYAMIDE 66 (PA66) 30 % GLASS FIBER AND 15 % PTFE POWDER FILLED IMPACT MODIFIED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《30%玻璃纤维和15%聚四氟乙烯(PT.pdf

FORD WSS-M4D947-B1-2007 POLYAMIDE (PA) 66 25% GLASS FIBER REINFORCED IMPACT MODIFIED INTERNALLY LUBRICATED (PTFE) HEAT STABILIZED MOLDED IN COLOR MOLDING COMPOUND INTERIOR TO BE U.pdf