GB 5937-1986 轻工产品镀锌白色化膜的存在试验及耐磨蚀试验方法.pdf

相关资源

QB T 3820-1999 轻工产品金属镀层和化学处理层的耐磨试验方法.pdf

QB T 3821-1999 轻工产品金属镀层的结合强度测试方法.pdf

QB T 3822-1999 轻工产品金属镀层的硬度测试方法 显微硬度法.pdf

QB T 3823-1999 轻工产品金属镀层的孔隙率测试方法.pdf

QB T 3824-1999 轻工产品黑色金属化学保护层的测试方法 浸渍点滴法.pdf

QB T 3830-1999 轻工产品金属镀层和化学处理层的耐腐蚀试验方法 二氧化硫试验法.pdf

QB T 3831-1999 轻工产品金属镀层和化学处理层的抗变色腐蚀试验方法 硫化氢试验法.pdf

QB T 3832-1999 轻工产品金属镀层腐蚀试验结果的评价.pdf

QB T 3833-1999 轻工产品铝或铝合金氧化处理层的测试方法.pdf

QB T 3818-1999 轻工产品金属镀层的厚度测试方法.点滴法.pdf

猜你喜欢

JIS B8397-3-2001 液压动力.发动机特性测定.第3部分恒定流速和恒定扭矩下测定.pdf

JIS B8398-2002 Hydraulic fluid power-Gas-loaded accumulators-Dimensions of gas ports.pdf

JIS B8399-2002 Hydraulic fluid power-Gas-loaded accumulators with separator-Selection of preferred hydraulic ports.pdf

JIS B8400-1-2003 Pneumatic fluid power-Five-port directional control valves, sizes 18mm and 26mm-Part1： Mounting interface surfaces without electrical connector.pdf

JIS B8401-1999 Automatic steam traps.pdf

JIS B8403-1-2005 Pneumatic fluid power-Cylinders, 1MPa series-Accessory mounting dimensions-Part 1：Rod end spherical eyes.pdf

JIS B8404-1-2005 Hydraulic fluid power-Cylinders-16MPa medium and 25MPa series-Accessory mounting dimensions-Part 1：Rod end plain eyes.pdf

JIS B8404-2-2005 Hydraulic fluid power-Cylinders-16MPa medium and 25MPa series-Accessory mounting dimensions-Part 2：Rod end spherical eyes.pdf

JIS B8404-3-2005 Hydraulic fluid power-Cylinders-16MPa medium and 25MPa series-Accessory mounting dimensions-Part 3：Rod end and bracket.pdf