1、2.1.1 Specification. standards. and handbooks. The following specifications, standards, and handbooks form a part of this document to the extent speci fi ed herein. documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DODISS) and supplement ther
2、eto, cited in the Un1 ess otherwi se speci fi ed, the i ssues of these solicitation (see 6.2). Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Standardization Department (Code 531, Lakehurst, NJ
3、 08733-5100, by using the Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. Naval Ai r Eng! neeri ng Center, Systems Engi neeri ng and SPECIFICATIONS a- MILITARY MI L-R-85545 Rocket, GTR-18A MIL-1-85547 Igniter, PVU-3A/E and PVU-3B/E !IN
4、CH-POUND! MI L-S-85892(AS) 30 November 1990 MILITARY SPECIFICATION SIMULATOR, SURFACE-TO-AIR MISSILE (SMOKEY SAM SIMULATOR) SMU-l24/E This specification is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Depar
5、tment of Defense. 1. SCOPE 1.1 Scope. This specification establishes the requirements for the manufacture and inspection of the Smokey SAM Simulator. The Smokey SAM Simulator is comprised of the GTR-18A Rocket, the PVU-3A/E Igniter, and a breech hole shield. 2. APPLICABLE DOCUMENTS 2.1 Government do
6、cuments. I DISTRIBUTION STATEMENT A. Approved for pub1 ic re1 ease; di stri bution is un1 imi ted. AMSC NIA FSC 1370 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-S-85892 13 W 9999906 0457655 4 W (Un1 ess otherwi se indicated, Copi es of federa
7、l and mi 1 i tary specifications, standards, and handbooks are avai lable from the Naval Standardization Documents Order Desk, Bldg 4D Robbins Avenue, Philadelphia, PA 19111-5094.) other Government documents, drawings, and publications form a part of this document to the extent specified herein. are
8、 those cited in the solicitation. 2.1.2 Other Government documents. drawinas, and Publications. The following Unless otherwise specified, the issues DRAW I NGS NAVAL AIR SYSTEMS COMMAND (NAVAIR) (CAGE Code 30003) 1335AS257 Breech Hole Shield 1335AS390 Simulator, Surface-to-Air Missile, SMU-l24/E (Sm
9、okey SAM Simulator) (Un1 ess otherwi se indicated, Copi es of Naval Air Systems Command drawings are available from the Naval Air Technical Services Facility (NATSF) (Code 3121), 700 Robbins Avenue, Philadelphia, Pa 19111-5096. 2.2 Order of Precedence In the event of a conflict between the text of t
10、his document and the references cited herein, the text of this document takes precedence. regulations unless a specific exemption has been obtained. Nothing i n thi s document, however I supersedes appl i cab1 e 1 aws and 3. REQUIREMENTS The Smokey SAM Simulator, see Draw-ing 1335AS390, shall meet t
11、he requirements of e section 3 of MIL-R-85545 and MIL-1-85547. requirements of Drawing 1335AS257, The breech hole shield shall meet the 4. QUALITY ASSURANCE PROVISIONS 4.1 Responsi bi 1 i tv for inspection. Un1 ess otherwi se specified in the contract or purchase order, the contractor is responsible
12、 for the performance of all inspection requirements (examinations and tests) as specified here! n, otherwise specified in the contract or purchase order, the contractor may use his own or any other facilities suitable for the performance of the inspection requi rements speci fi ed herein, un1 ess di
13、 sapproved by the Government. The Government reserves the right to perform any of the inspections set forth in this specification where such inspections are deemed necessary to ensure supplies and servi ces conform to prescribed requirements. sections 3 and 5. The inspection set forth in this specif
14、ication shall become a part of the contractors overall inspection system or quality program. The absence of any inspection requirements in the specification shall not relieve the contractor of the responsi bi 1 i ty of ensuring that al 1 products or supplies submitted to the Government for acceptanc
15、e comply with all requirements of the contract. Sampling inspection, as part of manufacturing operations, is an acceptabl e practi ce to ascertain conformance to requirements, however thi s does not authorize submission of known defective material nor does it commit the Government to accept defectiv
16、e material. and MIL-1-85547. Except as 4.1.1 ResPonsi bi 1 i tv for compl lance. Al 1 i tems shall meet al 1 requirements of either indicated or actual, The remainder of section 4 shall be in accordance with section 4 of MIL-R-85545 2 Provided by IHSNot for ResaleNo reproduction or networking permit
17、ted without license from IHS-,-,-MIL-S-85892 L3 W 779390b 0457bSb b W - . - _ - MI L-S-85892 (AS) 5. PACKAGING The Smokey Sam Simulator shall meet the packaging requirements of section 5 of MIL-R-85545 and MIL-85547. 6. NOTES (This section contains information of a general or explanatory nature that
18、 may be helpful, but is not mandatory.) 6.1 Intended use. The Smokey SAM Simulator is intended for use with the LMU-23A/E and LMU-24A/E Launchers to train aviation and ground forces to recognize and cope with attacking surface-1 aunch missi 1 es. 6.2 Acaui si tion reaui rements. fol lowing: Acquisit
19、ion documents should speci fy the a. b. C. d. e. f. g. h. i. j. Title, number and date of this specification. Issue of DODISS to be cited in the solicitationm, and if required, the specific issue of individual documents referenced (see 2.1.1). Part number. Quantity required. Whether first arti cl e
20、i s requi red. Date and place of delivery. Inspection conditions, if other than speci fi ed in MIL-R-85545 and Packing, marking, and lot numbering, if other than specified in MIL-R-85545 and MIL-1-85547. Time frame for submission of first article or quality conformance report. That the safety precau
21、tion requirements of the “Contractors Safety Manual for Ammunition, Explosives, and Related Dangerous Material,“ DOD 4145.26M are applicable. NOTE: When this specification is used as part of the description of work to be accomplished by a Government activity, the safety precaution requirements of “A
22、mmuni tion and Explosives Ashore,“ OP5 are applicable. MIL-1-85547. 6.3 Consideration of data reauirements. The following data requirements should be considered when this specification is applied on a contract. The applicable Data Item Descriptions (DIDS) should be reviewed in conjunction with the s
23、pecific acquisition to ensure that only essential data are requested/provided and that the DIDS are tailored to reflect the requirements of the specific acquisition. a Contract Data Requirements List (DD Form 1423) must be prepared to obtain the data, except where DOD FAR Supplement 27.475-1 exempts
24、 the requirement for a DD Form 1423. To ensure correct contractual application of the data requirements, Reference Parauraph DID Number DID Title 4.3 DI-NDTI-80566 Test plan 4.7 DI - T-2 07 2 Report, test Suggested Tai 1 ori nq The above DIDS were those cleared as of the date of this specification.
25、current issue of: DOO 5010.12-L, Acquisition Management Systems and Data Requirements Control List (AMSDL), must be reaearched to ensure that only current, cleared DIDS are cited on the DD Form 1423. 3 The Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-
26、,-,- MIL-S-85892 23 W 997990b 0457b57 8 6.4 First Article. When a first article inspection is required, the item should be a first article sample. rockets, 10 empty rockets, 36 igniters, and 24 breech hole shields. The contracting officer should include specific instructions in acquisition documents
27、 regarding arrangements for examinations, approval of first arti cl e test results and disposition of first articles. Invitations for bids should provide that the Government reserves the right to waive the requirements for samples for first article inspection to those bidders offering a product whic
28、h has been previously acquired or tested by the Government, and that bidders offering such products, who wish to rely on such production or test, must furnish evidence with the bid that prior Government approval is presently appropriate for the pending contract, Bidders should not submit alternate b
29、ids unless specifically requested to do so in the sol i ci tation. The first article should consist of 24 loaded 6.5 Subject term key word listinq. Breech hole shield Igniter, PVU-3A/E Rocket, GTR-18A Preparing Activity Navy - AS (Project No. 1370-N324) 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
