NBN 927-1971 1250 《玻璃纤维增强塑料 弯曲特性的测定（三次失败方法）》.pdf

相关资源

JIS K6919-1992 纤维增强塑料用液态不饱和聚酯树脂(追補1).pdf

JIS K6919-1992 纤维增强塑料用液态不饱和聚酯树脂.pdf

JIS K7016-2-2005 纤维增强塑料.试验板生产方法.第2部分接触造型和喷射成型法Fibre-reinforced plastics composites -- Determination of flexural properties.pdf

JIS A5701-1995 玻璃纤维增强塑料波纹板.pdf

JIS A4101-1994 抽水马桶用玻璃纤维增强塑料制污物处理装置结构件.pdf

JIS A5712-1994 带洗涤槽的玻璃纤维增强塑料浴盆.pdf

JIS K7016-5-2008 增强塑料.试验板的生产方法.第5部分绕丝法.pdf

JIS K7019-1999 纤维增强塑料复合材料.用正负45度SIGN拉伸试验法测定包括平面剪.pdf

JIS K7058-1995 玻璃纤维增强塑料横向剪切强度的测试方法.pdf

JIS K7073-1988 碳纤维增强塑料拉伸特性的试验方法.pdf

猜你喜欢

DIN 22261-5-2015 Excavators spreaders and auxiliary equipment in opencast lignite mines - Part 5 Slewing brakes and overload protecting devices《褐煤露天矿挖掘机、推土机和辅助设备 第5部分 回转式制动器和超载保险器》.pdf

DIN 22261-6-2015 Excavators spreaders and auxiliary equipment in opencast lignite mines - Part 6 Examination of ropes and rope end fittings《褐煤露天矿挖掘机、推土机和辅助设备 第6部分 绳索和绳索端紧固件的检验》.pdf

DIN 22270-2012 Continuous Surface Miner (CSM) - Safety《露天采矿机 (CSM) 安全性》.pdf

DIN 2231-2008 Geometrical product specifications (GPS) - Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size《产品几何量技术规范(GPS) 标称尺寸3～100mm的界限隙规和锻制量规体》.pdf

DIN 2232-2008 Geometrical product specifications (GPS) - Gap gauges GO with forged gauging member over 3 mm up to 100 mm nominal size《产品几何量技术规范(GPS) 锻造量规体标称直径3～100mm的过端隙规》.pdf

DIN 2233-2008 Geometrical product specifications (GPS) - Gap gauges NOT GO with forged gauging member over 3 mm up to 100 mm nominal size《产品几何量技术规范(GPS) 带锻制量规体标称尺寸3～100mm的不过端隙规》.pdf

DIN 2239-2006 Geometrical product specifications (GPS) - Gauge in dimensional metrology - Requirements and testing《产品几何量技术规范(GPS) 尺寸计量量规 要求和检验》.pdf

DIN 2240-1-2001 Geometrical Product Specification (GPS) - Handles - Part 1 For gauging members with taper lock 1 50 up to 40 mm nominal diameter《几何产品规范(GPS) 手柄 第1部分 公称直径可达40mm的带1 5.pdf

DIN 2240-2-2001 Geometrical Product Specification (GPS) - Handles - Part 2 For gauging members over 40 mm nominal diameter Handles fixing screws and clamps《几何产品规范(GPS) 手柄 第2部分 公称直径.pdf