NBN B 62-204-1979 8125 《建筑材料的热传输系数的决定》.pdf

相关资源

JIS A1324-1995 建筑材料中水蒸发及渗透的测量方法.pdf

JIS A1325-1995 建筑材料的热膨胀系数的测量方法.pdf

JIS A1451-2007 建筑材料及建筑构件的磨耗试验方法 (采用回转圆盘磨擦与冲击地板材料的磨耗试验方法).pdf

JIS A1452-1972 建筑材料及建筑构件的磨耗试验方法(落砂法).pdf

JIS A1415-1999 聚合物建筑材料暴露于试验室光源的方法.pdf

JIS A1470-1-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第1部分：湿度变化效应.pdf

JIS A1481-2006 建筑材料产品的石棉测定.pdf

JIS A1470-2-2008 建筑材料的水蒸气吸附∕解吸性能的测定.第2部分：温度效应.pdf

JIS A1453-1973 建筑材料及建筑构件的磨耗试验方法(砂纸法).pdf

DL T 5388-2007 水电水利工程天然建筑材料勘察规程.pdf

猜你喜欢

FORD WSS-M4D638-C-2015 POLYPROPYLENE (PP) MOLDING COMPOUND MOLDED-IN-COLOR INTERIOR HIGH IMPACT TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D638-C2-2006 POLYPROPYLENE (PP) MOLDING COMPOUND COLOR PIGMENTED LOW GLOSS UV STABILIZED INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Use WSS-M4D638-C)《内部染色的低光泽具有紫外线稳.pdf

FORD WSS-M4D638-D2-2013 POLYPROPYLENE (PP) COPOLYMER MOLDING COMPOUND MOLD-IN-COLOR LOW GLOSS UV STABILIZED HIGH IMPACT AT COLD TEMPERATURE INTERIOR TO BE USED WITH FORD WSS-M99P1.pdf

FORD WSS-M4D643-B1-2013 POLYPROPYLENE (PP) HOMOPOLYMER 40% MINERAL FILLED INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D644-A3-2005 POLYPROPYLENE (PP) HOMOPOLYMER HEAT STABILIZED 40% MINERAL FILLED CONTROLLED RHEOLOGY 25% MINIMUM RECYCLED CONTENT MOLDING COMPOUND TO BE USED WITH FORD WS.pdf

FORD WSS-M4D645-B1-2015 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND MONOWALL FUEL TANK TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D648-B1-2014 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D648-B1-2015 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A .pdf

FORD WSS-M4D648-B2-2014 POLYAMIDE (PA) 66 HEAT STABILIZED MOLDING COMPOUND MOLDED IN COLOR INTERIOR TO BE USED WITH FORD WSS-M99P1111-A (Shown on FORD WSS-M4D648-B1).pdf