NBN C 97-111-1973 8750 《用于声音分析与震动分析的八音度，半八音度的和三分之一八音度电声过滤器》.pdf

相关资源

BS EN ISO 8742-1998 Grooved pins - One-third-length centre grooved《带槽销 中心开三分之一长度槽》.pdf

CNS 9217-1982 Grooved Pins Third Length Center Grooved《槽销（中段三分之一长槽）》.pdf

DIN EN ISO 8742-1998 Grooved pins - One-third-length centre grooved (ISO 8742 1997) German version EN ISO 8742 1997《带槽销钉 三分之一长度中心槽销钉》.pdf

NBN-EN 28742-1992 0000 Grooved pins - Third-length centre grooved《带槽销 中部三分之一长槽型销》.pdf

NF E25-763-1997 Grooved pins One-third-length centre grooved 《带槽销 三分之一长度中心槽的销钉》.pdf

ONORM EN 28742-1993 Grooved pins -Third-Iength centre grooved《带槽销 中心开三分之一长度槽》.pdf

NORVEN 76-46-1966 《在混凝土梁柱的三分之一处进行抗弯曲能力测试》.pdf

SAE ARP 5534-2013 Application of Pure-Tone Atmospheric Absorption Losses to One-Third Octave-Band Data《纯音大气吸收损失在三分之一倍频带数据的应用》.pdf

猜你喜欢

FORD WSK-M3D154-A-2004 UNSATURATED POLYESTER (UP) INJECTION MOLDING COMPOUND 17% GLASS FIBER REINFORCED HIGH HEAT RESISTANT TO BE USED WITH FORD WSS-M99P1111-A 《17%玻璃纤维增强的耐高温不饱和聚.pdf

FORD WSK-M3D162-A-2004 PHENOLIC (PF) COMPRESSION MOLDING COMPOUND 50% MINERAL GLASS FIBER FILLED TO BE USED WITH FORD WSS-M99P1111-A 《50%矿物 玻璃纤维填充的酚醛树脂（PF）模压成型料 与标准FORD WSS-M99P.pdf

FORD WSK-M3D168-A1-2006 PHENOLIC (PF) 40% WOOD FLOUR FILLED INJECTION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%木屑填充的酚醛树脂（PF）注塑成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M3D168-A2-2004 PHENOLIC (PF) 40% WOOD FLOUR FILLED COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《40%木屑填充的酚醛树脂（PF）模压成型料 与标准FORD WSS-M99P1111-A一起使用 》.pdf

FORD WSK-M3D175-A-1995 UNSATURATED POLYESTER (PU) 20% CONTINUOUS GLASS FIBER REINFORCED MOLDING COMPOUND《20%玻璃纤维增强的不饱和聚酯（PU）连续成型料》.pdf

FORD WSK-M3D176-A1-2005 PHENOLIC (PF) 35% GLASS FIBER REINFORCED COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《35%玻璃纤维增强的酚醛树脂（PF）模压成型料 与标准FORD WSS-M99P1111-A.pdf

FORD WSK-M3D176-A2-2005 PHENOLIC (PF) 30% GLASS FIBER REINFORCED COMPRESSION MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《酚醛树脂（PF）30%玻璃纤维增强的模压成型料 与标准FORD WSS-M99P1111-A.pdf

FORD WSK-M3D176-A3-2005 PHENOLIC (PF) 30% GLASS FIBER REINFORCED PRE-PREG SHEET MOLDING COMPOUND TO BE USED WITH FORD WSS-M99P1111-A 《酚醛树脂（PF）30%玻璃纤维增强的预浸处理片状成型料 与标准FORD WSS-M99.pdf

FORD WSK-M3G178-A-2013 TAPE DECORATIVE PRESSURE SENSITIVE EXTERIOR TO BE USED WITH FORD WSS-M99P1111-A .pdf