NBN-EN 27785-1-1995 4375 《牙科用直头车 第1部分：为提高速度采用空气压缩涡轮机直头车（ISO 7785：1：1992）》.pdf

相关资源

NBN-EN 27785-2-1994 8125 《牙科用直头车 第2部分：直头车和弯头车（ISO 7785：2：1991） n》.pdf

猜你喜欢

CNS 4362-1980 Slotted Cheese Head Screws for Fine Mechanics M 0 3 to M 1 4《精密用有槽平顶锥头螺钉（标称直径自0 3MM至1 4MM）》.pdf

CNS 4363-1980 Slotted Countersunk (Flat) Head Screws for Fine Mechanics M 0 4 to M 1 4《精密用有槽平顶埋头螺钉（标称直径0 4MM至1 4MM）》.pdf

CNS 4364-1981 Hexagon Head Fitting Bolts with Long Threaded Portion《六角头配合螺栓（具长螺纹部份）》.pdf

CNS 4365-1981 Hexagon Head Fitting Bolts with Short Threaded Portion《六角头配合螺栓（具短螺纹部份）》.pdf

CNS 4366-1987 Hexagon Bolts with Large Widths Across Flats for Steel Structures (Joints with Hightensile Prestressed Bolts)《六角头螺栓（具大对面宽度、高预力连接钢结构用）》.pdf

CNS 4367-1978 Knuckle Threads for Steel Sheet pieces (up to 0 5 mm Thickness and Appropriated Couplings Dimensions Tolerances)《圆螺纹（厚0 5MM以下之钢皮制品及其 配合螺纹）》.pdf

CNS 4368-1978 Lifting Hooks Knuckle Threads《圆螺纹（起重机吊钩用）》.pdf

CNS 4369-1978 Round Thread with Clearance and Flat Flank with Pitch 7 mm Nominal Sizes《圆螺纹（具有间隙、浅螺腹，螺距为7MM之标称尺寸）》.pdf

CNS 4370-1978 Round Thread with Clearance and Flat Flank with Pitch 7mm (Limits of Size and Deviation--Tolerances and Permissible Wear of Thread Gauges)《圆螺纹(具有间隙浅螺腹、螺距为7mm之限界尺寸和偏差螺.pdf