NC 04-51-1970 Chemical analysis《化学分析》.pdf

相关资源

JIS G1602-1998 铁合金化学分析取样方法(第2部分钨铁、钼铁、钒铁、钛铁和铌铁合金).pdf

JIS G1603-1985 合金化学分析的取样方法(第3部分 磷铁、金属锰、金属硅、金属铬、硅钙及硼铁合金).pdf

JIS H6202-1986 化学分析用铂蒸发器.pdf

JIS G1326-2000 镍铁化学分析方法-解释.pdf

JIS G1301-1987 铁合金化学分析方法通则.pdf

JIS G1320-1968 磷铁化学分析方法.pdf

JIS H6201-1986 化学分析用铂坩埚.pdf

JIS H1012-2001 铜及铜合金的化学分析方法通则.pdf

JIS H1402-2001 钨粉及碳化钨粉的化学分析方法.pdf

JIS H1402-2006 钨粉及碳化钨粉的化学分析方法(修改件1).pdf

猜你喜欢

ASTM F2228-2013 Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method《采用二氧化碳示踪气体法对多孔防渗透材料的包装泄.pdf

ASTM F2229-2007 Standard Specification for Wrought Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS.pdf

ASTM F2229-2012 Standard Specification for Wrought Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS.pdf

ASTM F2230-2002 Standard Guide for In-situ Burning of Oil Spills on Water Ice Conditions《水面漏油现场燃烧的标准指南 冻结条件》.pdf

ASTM F2230-2008 Standard Guide for In-situ Burning of Oil Spills on Water Ice Conditions《水中－冰情况下油泄漏的现场燃烧的标准指南》.pdf

ASTM F2230-2014 Standard Guide for In-situ Burning of Oil Spills on Water Ice Conditions《水上溢油的现场燃烧标准指南 结冰条件下》.pdf

ASTM F2231-2002(2008) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes《压力管道用聚乙烯薄样品的却贝冲击试验的标准试验方法》.pdf

ASTM F2231-2002(2013) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes《压力管道用聚乙烯薄样品的却贝冲击试验的标准试验方法》.pdf

ASTM F2231-2002e1 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes《压力管道用聚乙烯薄样品的却贝冲击试验的标准试验方法》.pdf