NEN-EN 680-1994 Determination of the drying shrinkage of autoclaved aerated concrete《蒸压加气混凝土干燥收缩率的测定》.pdf

相关资源

JC 351-1983 蒸压加气混凝土板.pdf

JGJ 17-1984 蒸压加气混凝土应用技术规程.pdf

CECS 289-2011 蒸压加气混凝土砌块砌体 结构技术规范.pdf

JC 890-2001 蒸压加气混凝土用砌筑砂浆与抹面砂浆.pdf

JC T 1031-2007 蒸压加气混凝土模具.pdf

JC T 855-1999 蒸压加气混凝土板钢筋涂层防锈性能试验方法.pdf

JC T 921-2003 蒸压加气混凝土切割机.pdf

JC T 921-2014 蒸压加气混凝土切割机.pdf

GB T 11968-2006 蒸压加气混凝土砌块.pdf

GB T 15762-2008 蒸压加气混凝土板.pdf

猜你喜欢

BS ISO 16063-15-2006 Methods for the calibration of vibration and shock transducers - Primary angular vibration calibration by laser interferometry《振动和冲击传感器的校准方法 用激光干涉测量法进行初级振动角校准》.pdf

BS ISO 16063-16-2014 Methods for the calibration of vibration and shock transducers Calibration by Earth’s gravitation《振动和冲击传感器校准方法 采用地心引力的校准》.pdf

BS ISO 16063-17-2016 Methods for the calibration of vibration and shock transducers Primary calibration by centrifuge《振动与冲击传感器的校准方法 离心机法一次校准》.pdf

BS ISO 16063-31-2009 Methods for the calibration of vibration and shock transducers - Testing of transverse vibration sensitivity《振动和冲击传感器的校准方法 横向振动灵敏度的测试》.pdf

BS ISO 16063-32-2016 Methods for the calibration of vibration and shock transducers Resonance testing Testing the frequency and the phase response of accelerometers by means of sho.pdf

BS ISO 16063-41-2011 Methods for the calibration of vibration and shock transducers Calibration of laser vibrometers《震动和冲击传感器的校准方法 激光振动计的校准》.pdf

BS ISO 16063-42-2014 Methods for the calibration of vibration and shock transducers Calibration of seismometers with high accuracy using acceleration of gravity《振动和冲击传感器校准方法 采用重力加速.pdf

BS ISO 16063-43-2015 Methods for the calibration of vibration and shock transducers Calibration of accelerometers by model-based parameter identification《振动和冲击传感器校准方法 基于模型的参数识别的加速度.pdf

BS ISO 16063-45-2017 Methods for the calibration of vibration and shock transducers Part 45 In-situ calibration of transducers with built in calibration coil《振动和冲击传感器校准方法 第45部分 带内置.pdf