NF C26-287-1998 Dry solid insulating materials Resistance test to high-voltage low-current arc discharges 《干性固体绝缘材料 高压、低电流弧光放电阻抗试验》.pdf

相关资源

JIS A1902-4-2006 建筑产品用挥发性有机化合物和醛的排放测定.取样、试样制备和试验条件.第4部分热绝缘材料板.pdf

JIS F8052-2008 船舶和海洋技术.绝缘材料等级监控装置.设计.pdf

JB T 12060-2014 电气绝缘材料穿流循环烘箱.pdf

DL T 376-2010 复合绝缘子用硅橡胶绝缘材料通用技术条件.pdf

DL 449-1991 油浸纤维质绝缘材料含水量测定法（萃取法）.pdf

JB T 2197-1996 电气绝缘材料产品分类、命名及型号编制方法.pdf

JB T 8630-1997 用差示扫描量热法测定电气绝缘材料的熔融热、熔点及结晶热、结晶温度的试验方法.pdf

JB T 50176-1999 绝缘材料制品加热工序能耗分等（内部使用）.pdf

SJ 20386-1993 陶瓷电绝缘材料规范L级.pdf

JB T 10316-2013 低压成套开关设备和控制设备 绝缘支撑部件和绝缘材料.pdf

猜你喜欢

CEPT T CD 01-11 E-1985 General Engineering Requirements for a Groupband Modem According to CCITT Recommendation V 36《根据CCITT建议V 36的集群调制解调器一般工程要求》.pdf

CEPT T CD 01-12 E-1983 Concerning the Specification of Engineering Requirements for Three Types of Plug-in DCE s Operating with a User Data Signalling Rate of 2 400 Bits s《有关三类在240.pdf

CEPT T CD 01-13 E-1986 Engineering Requirements for a Voice Plus Data System《语音和数据系统工程要求》.pdf

CEPT T CD 01-14 E-1986 Specification of Equipment Practice for Data Transmission Equipment《数据传输设备设备实践规范》.pdf

CEPT T CD 02-01 E-1986 Specification of Engineering Requirements for a Synchronous Digital Multiplexer Operating at 64 KBit s Using an 8 Bit (6+2) Envelope Structure《使用8 Bit(6+2)封套.pdf

CEPT T CD 02-02 E-1986 Specification of Engineering Requirements for a Synchronous Digital Multiplexer Operating at 64 KBit s Using a 10 Bit (8+2) Envelope Structure《使用10 Bit(8+2)封.pdf

CEPT T CD 02-04 E-1986 Engineering Requirements for a Synchronous Digital Multiplexer for Use with Non Envelope Structured Data《与无封套结构数据一起使用的的同步数字复用器工程要求》.pdf

CEPT T CD 02-04 E-1988 Engineering Requirements for a Synchronous Digital Multiplexer for Use with Non Envelope Structured Data (Revised in Edinburgh 1988)《与无封套结构数据一起使用的的同步数字复用器工程要.pdf

CEPT T CD 02-05 E-1986 Engineering Requirements for a Bus Interface to Be Used in Data Communication Equipment《要用于数据通信设备中的总线接口工程要求》.pdf