NFPA 1991-2016 Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies and CBRN Terrorism Incidents (Effective Date 12 4 2015).pdf

1、1991 NFPA Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies and CBRN Terrorism Incidents 2016 ORDER T o order or for more details on other NFPA products or seminars, call 1-800-344-3555. For orders outside the U.S., call 617-770-3000. VISIT our online catalog at catalog.nfpa

2、.org.IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA DOCUMENTS NOTICE AND DISCLAIMER OF LIABILITY CONCERNING THE USE OF NFPA DOCUMENTS NFPA codes, standards, recommended practices, and guides (“NFPA Standards”), of which the document contained herein is one, are developed through a consensus stand

3、ards development process approved by the American National Standards Institute. This process brings together volunteers representing varied viewpoints and interests to achieve consensus on re and other safety issues. While the NFPA administers the process and establishes rules to promote fairness in

4、 the development of consensus, it does not independently test, evaluate, or verify the accuracy of any information or the soundness of any judgments contained in NFPA Standards. The NFPA disclaims liability for any personal injury, property or other damages of any nature whatsoever, whether special,

5、 indirect, consequential or compensatory, directly or indirectly resulting from the publication, use of, or reliance on NFPA Standards. The NFPA also makes no guaranty or warranty as to the accuracy or completeness of any information published herein. In issuing and making NFPA Standards available,

6、the NFPA is not undertaking to render professional or other services for or on behalf of any person or entity. Nor is the NFPA undertaking to perform any duty owed by any person or entity to someone else. Anyone using this document should rely on his or her own independent judgment or, as appropriat

7、e, seek the advice of a competent professional in determining the exercise of reasonable care in any given circumstances. The NFPA has no power, nor does it undertake, to police or enforce compliance with the contents of NFPA Standards. Nor does the NFPA list, certify, test, or inspect products, des

8、igns, or installations for compliance with this document. Any certication or other statement of compliance with the requirements of this document shall not be attributable to the NFPA and is solely the responsibility of the certier or maker of the statement. REMINDER: UPDATING OF NFPA STANDARDS User

9、s of NFPA codes, standards, recommended practices, and guides (“NFPA Standards”) should be aware that NFPA Standards may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current edit

10、ion of the document together with any Tentative Interim Amendment and any Errata then in effect. In order to determine whether an NFPA Standard has been amended through the issuance of Tentative Interim Amendments or corrected by Errata, visit the Document Information Pages on NFPAs website. The Doc

11、ument Information Pages provide up-to-date, document specic information including any issued Tentative Interim Amendments and Errata. To access the Document Information Page for a specic NFPA Standard, go to http:/ www.nfpa.org/docinfo to choose from the list of NFPA Standards or use the search feat

12、ure on the right to select the NFPA Standard number (e.g., NFPA 101). The Document Information page includes postings of all existing Tentative Interim Amendments and Errata. It also includes the option to register for an “Alert” feature to receive an automatic email notication when new updates and

13、other information are posted regarding the document. ISBN: 978-145591316-9 (Print) ISBN: 978-145591343-5 (PDF)IMPORTANT NOTICES AND DISCLAIMERS CONCERNING NFPA STANDARDS ADDITIONAL NOTICES AND DISCLAIMERS Updating of NFPA Standards Users of NFPA codes, standards, recommended practices, and guides (“

14、NFPA Standards”) should be aware that these documents may be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of Tentative Interim Amendments or corrected by Errata. An ofcial NFPA Standard at any point in time consists of the current ed

15、ition of the document together with any Tentative Interim Amendments and any Errata then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of Tentative Interim Amendments or corrected through the issuance of Errata,

16、consult appropriate NFPA publications such as the National Fire Codes Subscription Service, visit the NFPA website at www.nfpa.org, or contact the NFPA at the address listed below. Interpretations of NFPA Standards A statement, written or oral, that is not processed in accordance with Section 6 of t

17、he Regulations Governing the Development of NFPA Standards shall not be considered the ofcial position of NFPA or any of its Committees and shall not be considered to be, nor be relied upon as, a Formal Interpretation. Patents The NFPA does not take any position with respect to the validity of any p

18、atent rights referenced in, related to, or asserted in connection with an NFPA Standard. The users of NFPA Standards bear the sole responsibility for determining the validity of any such patent rights, as well as the risk of infringement of such rights, and the NFPA disclaims liability for the infri

19、ngement of any patent resulting from the use of or reliance on NFPA Standards. NFPA adheres to the policy of the American National Standards Institute (ANSI) regarding the inclusion of patents in American National Standards (“the ANSI Patent Policy”), and hereby gives the following notice pursuant t

20、o that policy: NOTICE: The users attention is called to the possibility that compliance with an NFPA Standard may require use of an invention covered by patent rights. NFPA takes no position as to the validity of any such patent rights or as to whether such patent rights constitute or include essent

21、ial patent claims under the ANSI Patent Policy. If, in connection with the ANSI Patent Policy, a patent holder has led a statement of willingness to grant licenses under these rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such a license, copies of s

22、uch led statements can be obtained, on request, from NFPA. For further information, contact the NFPA at the address listed below. Law and Regulations Users of NFPA Standards should consult applicable federal, state, and local laws and regulations. NFPA does not, by the publication of its codes, stan

23、dards, recommended practices, and guides, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. Copyrights NFPA Standards are copyrighted. They are made available for a wide variety of both public and private uses. These include b

24、oth use, by reference, in laws and regulations, and use in private self-regulation, standardization, and the promotion of safe practices and methods. By making these documents available for use and adoption by public authorities and private users, the NFPA does not waive any rights in copyright to t

25、hese documents. Use of NFPA Standards for regulatory purposes should be accomplished through adoption by reference. The term “adoption by reference” means the citing of title, edition, and publishing information only. Any deletions, additions, and changes desired by the adopting authority should be

26、noted separately in the adopting instrument. In order to assist NFPA in following the uses made of its documents, adopting authorities are requested to notify the NFPA (Attention: Secretary, Standards Council) in writing of such use. For technical assistance and questions concerning adoption of NFPA

27、 Standards, contact NFPA at the address below. For Further Information All questions or other communications relating to NFPA Standards and all requests for information on NFPA procedures governing its codes and standards development process, including information on the procedures for requesting Fo

28、rmal Interpretations, for proposing Tentative Interim Amendments, and for proposing revisions to NFPA standards during regular revision cycles, should be sent to NFPA headquarters, addressed to the attention of the Secretary, Standards Council, NFPA, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02

29、269-9101; email: stds_adminnfpa.org For more information about NFPA, visit the NFPA website at www.nfpa.org. All NFPA codes and standards can be viewed at no cost at www.nfpa.org/freeaccess.1991-1 NFPA and National Fire Protection Association are registered trademarks of the National Fire Protection

30、 Association, Quincy, Massachusetts 02169. Copyright 2015 National Fire Protection Association . All Rights Reserved. NFPA 1991 Standard on Vapor-Protective Ensembles for Hazardous Materials Emergencies and CBRN Terrorism Incidents 2016 Edition This edition of NFPA 1991, Standard on Vapor-Protective

31、 Ensembles for Hazardous Materials Emergencies and CBRN Terrorism Incidents, was prepared by the Technical Committee on Hazardous Materials Protective Clothing and Equipment and released by the Correlating Committee on Fire and Emergency Services Protective Clothing and Equipment. It was issued by t

32、he Standards Council on November 14, 2015, with an effective date of December 4, 2015, and supersedes all previous editions. This edition of NFPA 1991 was approved as an American National Standard on December 4, 2015. Origin and Development of NFPA 1991 In 1985, the National Transportation Safety Bo

33、ard (NTSB) issued Report I-004-5 on a hazardous material incident that occurred in Benicia, California. In that report, the NTSB recommended that standards be developed for protective clothing for protection from hazardous chemicals. The U.S. Department of Transportation (DOT) issued a position that

34、 requested private sector standards development to undertake the project of writing the standards on hazardous chemical protective clothing and asked other governmental agencies to assist and participate in the private sector standards development system. DOT time also directly requested that the NF

35、PA develop documents on hazardous chemical protective clothing. The Environmental Protection Agency (EPA), the U.S. Coast Guard (USCG), the Federal Emergency Management Agency (FEMA), and the Occupational Safety and Health Administration (OSHA) either adopted position statements modeled after the DO

36、T position or endorsed the DOT position. During 1985, the NFPA Standards Council approved a project for development of those standards and assigned the project to the Technical Committee on Fire Service Protective Clothing and Equipment. The Technical Committee established a standing Subcommittee on

37、 Hazardous Chemicals Protective Clothing, which began work in Phoenix, Arizona, in March 1986. Representatives from the USCG, FEMA, and OSHA participated on the subcommittee. At the same time, the American Society for Testing and Materials (now ASTM International) was developing a document on a sele

38、ction of chemicals for evaluating protective clothing materials that would serve as one of several ASTM testing criteria that would be referenced in the NFPA standards. The subcommittee met several times over a 2-year period at different locations across the country and developed two standards, one

39、for vapor-protection and one for liquid-splash protection. NFPA 1991 addresses vapor-protective ensembles designed to protect emergency response personnel against exposure to specied chemicals in vapor and liquid-splash environments during hazardous materials emergencies. Chemical permeation resista

40、nce documentation is required for primary suit materials (garment, visor, gloves, and boots) against each chemical in the NFPA battery of chemicals and any additional chemicals or specic chemical mixtures for which the manufacturer is certifying the suit. The NFPA battery of chemicals consists of 21

41、 chemicals, as specied in ASTM F1001, Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials. These chemicals were selected because they are representative of the classes of chemicals that are encountered during hazardous chemical emergencies. NFPA 1991 includes performa

42、nce requirements that were established to reect simulated use conditions. A suit pressurization test is used to check the airtight integrity of each protective suit. Also, an overall suit water penetration test is designed to ensure the suit provides full body protection against liquid splashes. Pri

43、mary suit materials must resist permeation for 1 hour or more by each chemical in the NFPA battery. Manufacturers can certify protective suits for additional chemicals ifVAPOR-PROTECTIVE ENSEMBLES FOR HAZARDOUS MATERIALS EMERGENCIES AND CBRN TERRORISM INCIDENTS 1991-2 2016 Edition the same permeatio

44、n performance is met. Also included are penetration resistance testing of closures and leak and cracking pressure tests for exhaust valves. These tests allow determination of adequate suit component performance in hazardous chemical environments. Material testing for burst strength, tear strength, a

45、brasion resistance, ammability resistance, cold temperature performance, and exural fatigue are required so that materials used for vapor-protective suits will afford adequate protection in the environment in which they will be used. The rst edition of NFPA 1991 was voted on by the Association at th

46、e 1989 Fall Meeting in Seattle, Washington, on November 15, 1989, and had an effective date of February 5, 1990. The Subcommittee on Hazardous Chemicals Protective Clothing began an early revision (4-year cycle) of the 1990 edition of NFPA 1991 in December 1991. During 1993, the NFPA restructured th

47、e manner in which committees were organized, and all standing subcommittees were eliminated. Within the Technical Committee on Fire Service Protective Clothing and Equipment, the former standing subcommittees were reorganized as task groups to address specic technical issues, and the technical commi

48、ttee assumed the entire responsibility for NFPA 1991. The second edition of NFPA 1991 encompassed revised scope and purpose sections to include optional components for enhanced protection and replacement items. Test methods were updated and rened to better ensure repeatability of testing results. Ex

49、tensive changes were made to the product labels to better accommodate the optional and replacement items. The second edition was acted on by the membership of the Association at the NFPA Annual Meeting in San Francisco, California, on May 18, 1994, and was issued with an effective date of August 5, 1994. In January 1995, the entire project for re service protective clothing and equipment was reorganized by the Standards Council. The new project has a Technical Correlating Committee on Fire and Emergency Services Protective Clothing and Equipment and seven