SANS 5615-2010 Method for the sampling of footwear components and materials other than leather《鞋类组件和除皮革外的材料的取样方法》.pdf

1、 Collection of SANS standards in electronic format (PDF) 1. Copyright This standard is available to staff members of companies that have subscribed to the complete collection of SANS standards in accordance with a formal copyright agreement. This document may reside on a CENTRAL FILE SERVER or INTRA

2、NET SYSTEM only. Unless specific permission has been granted, this document MAY NOT be sent or given to staff members from other companies or organizations. Doing so would constitute a VIOLATION of SABS copyright rules. 2. Indemnity The South African Bureau of Standards accepts no liability for any

3、damage whatsoever than may result from the use of this material or the information contain therein, irrespective of the cause and quantum thereof. ISBN 978-0-626-22412-7 SANS 5615:2010Edition 2SOUTH AFRICAN NATIONAL STANDARD Method for the sampling of footwear components and materials other than lea

4、ther Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001Tel: +27 12 428 7911 Fax: +27 12 344 1568 www.sabs.co.za SABS SANS 5615:2010 Edition 2 Table of changes Change No. Date Scope Foreword This South African standard was approved by National Committee S

5、ABS SC 216G, Footwear Footwear test methods, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was published in January 2010. This document supersedes SABS SM 615:1968 (first edition). SANS 5615:2010 Edition 2 1 Method fo

6、r the sampling of footwear components and materials other than leather 1 Scope This standard specifies a method for the sampling of rubber and footwear components and materials. 2 Definitions For the purpose of this document, the following definitions apply. nominal subject to the tolerances normal

7、to good manufacturing practice 3 Method of sampling Unless otherwise specified, take a nominal sample for chemical and physical testing as described below. 3.1 Rubber The size of rubber samples should be as indicated below. 3.1.1 Direct moulded footwear Take a sample of 500 g of raw rubber. 3.1.2 Pr

8、e-moulded soles and heels Take a sample of 500 g of raw rubber, or six pairs of soles of size 8 or larger, or eight pairs of soles or heels of the largest available size. 3.1.3 Sheet rubber Take a sheet of size at least 35 cm 35 cm 3 mm and one of 10 cm 10 cm 1 cm. 3.2 Footwear components and materi

9、als Take a sample of at least eight stiffeners, 800 cm2of inner-sole material, 800 cm2of toe-puff material and 800 cm2of vamp lining. SABS This page has been left blank intentionally SABS Standards Division The objective of the SABS Standards Division is to develop, promote and maintain South Africa

10、n National Standards. This objective is incorporated in the Standards Act, 2008 (Act No. 8 of 2008). Amendments and Revisions South African National Standards are updated by amendment or revision. Users of South African National Standards should ensure that they possess the latest amendments or edit

11、ions. The SABS continuously strives to improve the quality of its products and services and would therefore be grateful if anyone finding an inaccuracy or ambiguity while using this standard would inform the secretary of the technical committee responsible, the identity of which can be found in the

12、foreword. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 The SABS offers an individual notification service, which ensures that subscribers automatically receive notification regarding amendments and revisions to South African National Standards. Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928

13、E-mail: salessabs.co.za Buying Standards Contact the Sales Office for South African and international standards, which are available in both electronic and hardcopy format. Tel: +27 (0) 12 428 6883 Fax: +27 (0) 12 428 6928 E-mail: salessabs.co.za South African National Standards are also available o

14、nline from the SABS website http:/www.sabs.co.za Information on Standards The Standards Information Centre provides a wide range of standards-related information on both national and international standards, and is the official WTO/TBT enquiry point for South Africa. The Centre also offers an indivi

15、dual updating service called INFOPLUS, which ensures that subscribers automatically receive notification regarding amendments to, and revisions of, international standards. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 E-mail: infosabs.co.za Copyright The copyright in a South African National St

16、andard or any other publication published by the SABS Standards Division vests in the SABS. Unless exemption has been granted, no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means without prior written permission from the SABS Standards Division. This

17、 does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any purpose other than implementation, prior written permission must be obtained. Details and advice can be obtained from the Senior Manager. Tel: +27 (0) 12 428 6666 Fax: +27 (0) 12 428 6928 E-mail: infosabs.co.za