TIA-1078-2009 ISIM Application on UICC for cdma2000 Spread Spectrum Systems《cdma2000扩频系统中ISIM在UICC上的应用》.pdf

1、 TIA-1078-2009 APPROVED: MARCH 1, 2009 REAFFIRMED: MARCH 16, 2014 TIA-1078 March 2009ISIM Application on UICC for cdma2000Spread Spectrum SystemsNOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and

2、 purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-membe

3、r of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in

4、accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety prob

5、lems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are f

6、or information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. 3-0213-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA

7、 or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued pat

8、ents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA

9、 takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge

10、whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative Ref

11、erences to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as d

12、efined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering M

13、anual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applic

14、ations. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDIN

15、G WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR

16、 THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE

17、 CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFI

18、TS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND

19、THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-1078 CONTENTS 1 2 1 PREFACE.2 3 2 REFERENCES 4 4 3 INTRODUCTION .4 5 4 Definitions, symbols, abbreviations and coding conventionS 4 6 5 Characteristics of the IP Multimedia Subsystem Services Identity Module (ISIM) 7 Applicat

20、ion4 8 9 10 TIA-1078 2 1 1 PREFACE 2 For ISIM application for access to IMS services in cdma2000systems, the present 3 document specifies: 4 specific command parameters; 5 file structures; 6 contents of EFs (Elementary Files); 7 security functions; 8 application protocol to be used on the interface

21、between UICC (ISIM) and Terminal. 9 This document addresses ISIM implementation on UICC only. 10 This is to ensure interoperability between an ISIM and Terminal independently of the 11 respective manufacturer, card issuer or operator. 12 The present document does not define any aspects related to th

22、e administrative 13 management phase of the ISIM. Any internal technical realization of either the ISIM or 14 the Terminal is only specified where these are reflected over the interface. The present 15 document does not specify any of the security algorithms that may be used. 16 17 18 19 TIA-1078 3

23、NOTES 1 1. The following verbal forms are used: “Shall” and “shall not” identify requirements to 2 be followed strictly to conform to the standard and from which no deviation is 3 permitted. “Should” and “should not” indicate that one of several possibilities is 4 recommended as particularly suitabl

24、e, without mentioning or excluding others; that 5 a certain course of action is preferred but not necessarily required; or that (in the 6 negative form) a certain possibility or course of action is discouraged but not 7 prohibited. “May” and “need not” indicate a course of action permissible within

25、the 8 limits of the standard. “Can” and “cannot” are used for statements of possibility and 9 capability, whether material, physical, or causal. 10 2. Footnotes appear at various points in this specification to elaborate and to further 11 clarify items discussed in the body of the specification. 12

26、3. Unless indicated otherwise, this document presents numbers in decimal form. 13 Binary numbers are distinguished in the text by the use of single quotation marks. 14 In some tables, binary values may appear without single quotation marks if table 15 notation clearly specifies that values are binar

27、y. The character x is used to 16 represent a bit of unspecified value. For example xxx00010 represents any 8-bit 17 binary value such that the least significant five bits equal 00010. 18 Hexadecimal numbers (base 16) are distinguished in the text by use of the form 0xh-19 h where hh represents a str

28、ing of hexadecimal digits. For example, 0x2fa1 20 represents a number whose binary value is 0010111110100001 and whose decimal 21 value is 12193. Note that the exact number of bits in the binary representation of a 22 hexadecimal number strictly depends upon the implementation requirements for 23 th

29、e variable being represented. 24 4. “Base station” refers to the functions performed on the fixed network, which are 25 typically distributed among a cell, a sector of a cell, and a mobile communications 26 switching center. 27 28 TIA-1078 4 2 REFERENCES 1 2 The following standards are referenced in

30、 this text. At the time of publication, the editions 3 indicated were valid. All standards are subject to revision, and parties to agreements based 4 upon this document are encouraged to investigate the possibility of applying the most 5 recent editions of the standards indicated below. ANSI and TIA

31、 maintain registers of 6 currently valid national standards published by them. 7 8 1. ETSI TS 102 221, Smart Cards; UICC-Terminal interface; Physical and logical 9 characteristics, Release 6. 10 2. ETSI TS 131 103 Characteristics of the IP Multimedia Services Identity Module 11 application, Release

32、6. 12 3. 3GPP2 S.R0086-A IMS Security Framework, June 2004. 13 4. TIA-873.000 IP Multimedia Subsystem Stage 2, February 2004. 14 5. TIA-1058, UICC-Terminal interface Physical and Logical characteristics for Spread 15 Spectrum systems, December 2005. 16 3 INTRODUCTION 17 The present document defines

33、the IP Multimedia Services Identity Module (ISIM) 18 application. This application resides on the UICC, an IC card specified in 1. In particular, 19 5 specifies the application independent properties of the UICC/terminal interface such as 20 the physical characteristics and the logical structure in

34、the context of 3GPP2 systems. 21 22 4 DEFINITIONS, SYMBOLS, ABBREVIATIONS AND CODING CONVENTIONS 23 All definitions, symbols, abbreviations applicable to the ISIM are specified in 2. 24 25 5 CHARACTERISTICS OF THE IP MULTIMEDIA SUBSYSTEM SERVICES IDENTITY 26 MODULE (ISIM) APPLICATION 27 The IP Multi

35、media Subsystem for Spread Spectrum system is specified in 4. The IMS 28 Security Framework for Spread Spectrum Systems is specified in 3. 29 The ISIM application for 3GPP2 systems shall comply with all requirements stated in 2. 30 Reference 14 specified in 2 shall be interpreted as reference 3 of t

36、his document in the 31 context of 3GPP2 systems. 32 NOTE: The file EFP-CSCFspecified in 2 is mandatory for 3GPP2 systems. 33 34 THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT) industry through standards development, advocacy, trad

37、eshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).