TIA-1171-2010 Recommended Minimum Performance Standards for cdma2000 Ultra Mobile Broadband Access Terminal《cdma2000超移动宽带接入终端的推荐最低性能标准》.pdf

1、 TIA-1171 February 2010 Recommended Minimum Performance Standards for cdma2000Ultra Mobile Broadband Access Terminal NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating in

2、terchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing

3、or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American

4、 National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use

5、 or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0363, formulated under the cognizance of the TIA TR-

6、45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Documen

7、t may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs atten

8、tion, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing ter

9、ms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied wit

10、h as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or

11、otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Nor

12、mative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constit

13、ute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance w

14、ith the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD

15、 PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR

16、 ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECI

17、AL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE

18、FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. No Text. C.S0089-0 v1.0 CONTENTS i FOREWORD xi 1 SCOPE xiii 2 NOTES xv 3 NORMATIVE REFERENCES. xvii 4 1 Introduction .1-1 5 1.1 Overvie

19、w 1-1 6 1.2 Terms and Definitions 1-1 7 1.2.1 Definitions .1-1 8 2 Standard Radiated Emissions Measurement Procedure 2-1 9 2.1 Standard Radiation Test Site 2-1 10 2.2 Search Antenna.2-1 11 2.3 Field-Strength Measurement2-2 12 2.4 Frequency Range of Measurements .2-2 13 2.5 Test Ranges .2-2 14 2.5.1

20、30-Meter Test Range .2-2 15 2.5.2 3-Meter Test Range .2-3 16 2.6 Radiated Signal Measurement Procedures 2-3 17 3 Physical Layer Receiver Minimum Standards .3-1 18 3.1 Frequency Coverage Requirements3-1 19 3.2 Receiver Performance .3-1 20 3.2.1 Receiver Sensitivity ,Dynamic Range and High Throughput

21、3-1 21 3.2.1.1 Definition .3-1 22 3.2.1.2 Method of Measurement3-1 23 3.2.1.3 Minimum Standard .3-3 24 3.2.2 Intermodulation Spurious Response Attenuation 3-3 25 3.2.2.1 Definition .3-4 26 3.2.2.2 Method of Measurement3-4 27 3.2.2.3 Minimum Standard .3-6 28 3.2.3 Adjacent Channel Selectivity3-6 29 3

22、.2.3.1 Definition .3-7 30 C.S0089-0 v1.0 CONTENTS ii 3.2.3.2 Method of Measurement3-7 1 3.2.3.3 Minimum Standard .3-8 2 3.2.4 Receiver Blocking Characteristics .3-8 3 3.2.4.1 Definition .3-8 4 3.2.4.2 Method of Measurement3-9 5 3.2.4.3 Minimum Standards3-14 6 3.3 Limitations on Emissions .3-14 7 3.3

23、.1 Conducted Spurious Emissions.3-14 8 3.3.1.1 Definition .3-14 9 3.3.1.2 Method of Measurement3-14 10 3.3.1.3 Minimum Standard .3-14 11 3.3.2 Radiated Spurious Emissions3-15 12 3.3.2.1 Definition .3-15 13 3.3.2.2 Method of Measurement3-15 14 3.3.2.3 Minimum Standard .3-15 15 4 Physical Layer Transm

24、itter Minimum Standards .4-1 16 4.1 Frequency Requirements 4-1 17 4.1.1 Frequency Coverage 4-1 18 4.1.2 Frequency Accuracy 4-1 19 4.1.2.1 Definition .4-1 20 4.1.2.2 Method of Measurement4-1 21 4.1.2.3 Minimum Standard .4-1 22 4.2 Modulation Requirements .4-1 23 4.2.1 Error Vector Magnitude and Frequ

25、ency Accuracy 4-1 24 4.2.1.1 Definition .4-1 25 4.2.1.2 Method of Measurement4-1 26 4.2.1.3 Minimum Standard .4-2 27 4.3 RF Output Power Requirements 4-3 28 4.3.1 Minimum Controlled Output Power 4-3 29 4.3.1.1 Definition .4-3 30 C.S0089-0 v1.0 CONTENTS iii 4.3.1.2 Method of Measurement4-3 1 4.3.1.3

26、Minimum Standard .4-3 2 4.3.2 Maximum RF Output Power.4-3 3 4.3.2.1 Definition .4-3 4 4.3.2.2 Method of Measurement4-4 5 4.3.2.3 Minimum Standard .4-4 6 4.4 Limitations on Emissions .4-5 7 4.4.1 Conducted Spurious Emissions.4-5 8 4.4.1.1 Definition .4-5 9 4.4.1.2 Method of Measurement4-5 10 4.4.1.3

27、Minimum Standard .4-6 11 4.4.2 Radiated Spurious Emissions4-8 12 5 Environmental Requirements.5-1 13 5.1 Temperature and Power Supply Voltage .5-1 14 5.1.1 Definition .5-1 15 5.1.2 Method of Measurement5-1 16 5.1.3 Minimum Standard .5-2 17 5.2 High Humidity5-2 18 5.2.1 Definition .5-2 19 5.2.2 Metho

28、d of Measurement5-2 20 5.2.3 Minimum Standard .5-3 21 5.3 Vibration Stability5-3 22 5.3.1 Definition .5-3 23 5.3.2 Method of Measurement5-3 24 5.3.3 Minimum Standard .5-3 25 5.4 Shock Stability.5-3 26 5.4.1 Definition .5-3 27 5.4.2 Method of Measurement5-3 28 5.4.3 Minimum Standard .5-3 29 6 Standar

29、d Test Conditions 6-1 30 C.S0089-0 v1.0 CONTENTS iv 6.1 Standard Equipment 6-1 1 6.1.1 Basic Equipment 6-1 2 6.1.2 Associated Equipment .6-1 3 6.2 Standard Environmental Test Conditions 6-1 4 6.3 Standard Conditions for the Primary Power Supply6-1 5 6.3.1 General 6-1 6 6.3.2 Standard DC Test Voltage

30、 from Accumulator Batteries .6-1 7 6.3.3 Standard AC Voltage and Frequency .6-2 8 6.4 Standard Test Equipment 6-2 9 6.4.1 Waveform Quality Measurement Equipment6-2 10 6.4.1.1 EVM Meter6-2 11 6.4.1.2 EVM Computation 6-2 12 6.4.1.3 Proposed Procedure for measuring EVM .6-3 13 6.4.2 Access Network Simu

31、lator 6-4 14 6.4.3 AWGN Generator6-4 15 6.4.4 CW Generator 6-4 16 6.4.5 Spectrum Analyzer 6-5 17 6.4.6 Average Power Meter .6-6 18 6.5 Functional System Setups 6-6 19 6.5.1 Functional Block Diagrams .6-6 20 6.6 Error Rates Measurement .6-9 21 6.6.1 Forward Traffic Channel PER 6-9 22 6.7 Confidence I

32、nterval .6-9 23 6.7.1 Confidence Level of Error Rate 6-9 24 6.7.2 Confidence level of Detection Time 6-13 25 ANNEX A Common Procedures 1 26 A.1 MAC and PHYSICAL Layer Configuration 1 27 A.2 Forward and Reverse Channels and Link Assignment Block (LAB) Assignments. 1 28 A.2.1 Forward Link PER Measurem

33、ent Test . 1 29 A.2.2 Emissions Test . 1 30 C.S0089-0 v1.0 CONTENTS v A.2.3 Error Vector Magnitude (EVM) Test 1 1 A.3 Session and Test Application Configurations . 1 2 A.3.1 Forward Link PER Measurement . 1 3 A.3.2 Emissions Test. 2 4 5 C.S0089-0 v1.0 vi No Text. 1 2 C.S0089-0 v1.0 FIGURES vii 1 Fig

34、ure 6.5.1-1. Functional Set-up for Traffic Channel Tests in Fading Channel with Full 2 Packet Activity 6-7 3 Figure 6.5.1-2. Functional Set-up for Tests in Soft Handoff . 6-7 4 Figure 6.5.1-3. Functional Set-up for Searcher Tests in Handoff 6-8 5 Figure 6.5.1-4. Functional Set-up for Tests without F

35、ading 6-8 6 Figure 6.5.1-5. Functional Set-up for Test for Adjacent Channel Selectivity . 6-9 7 Figure 6.7.1-1. Rate Ratio Bound as a Function of Number of Errors (K) for 95% Confidence8 . 6-11 9 Figure 6.7.1-2. Rate Ratio Bound as a Function of Number of Errors (K) for 90% Confidence10 . 6-11 11 Fi

36、gure 6.7.1-3. Test Requirement for 95% Confidence of FER = 0.01 6-12 12 Figure 6.7.1-4. Test Requirement for 90% Confidence of FER = 0.1 6-12 13 14 15 C.S0089-0 v1.0 viii No Text.1 C.S0089-0 v1.0 TABLES ix Table 3.2.1.2-1. Test Parameters for Receiver Sensitivity, High Throughput and Dynamic 1 Range

37、. 3-2 2 Table 3.2.1.2-2. Received power levels corresponding to Sensitivity test . 3-3 3 Table 3.2.1.2-3. Received levels corresponding to High throughput and Dynamic Range test3-3 4 Table 3.2.2.2-1. Test Parameters for Intermodulation Spurious Response Attenuation for 5 Broadband Interference 3-5 6

38、 Table 3.2.2.2-2. Test Parameters for Intermodulation Spurious Response Attenuation for 7 Narrowband Interference 3-6 8 Table 3.2.3.2-1. Test Parameters for Adjacent Channel Selectivity 3-8 9 Table 3.2.4.2-1. Test Parameters for Receiver Blocking Characteristics (In-Band) . 3-11 10 Table 3.2.4.2-2.

39、Test Parameters for Receiver Blocking Characteristics (Out-Of-Band) . 3-12 11 Table 3.2.4.2-3. Spurious response specifications . 3-13 12 Table 3.2.4.2-4. Narrow band blocking specifications 3-13 13 Table 3.3.2.3-1. Maximum Allowable Radiated Spurious Emissions for Band Classes 0, 1, 7, 14 and 10 3-

40、16 15 Table 3.3.2.3-2. Maximum Allowable Radiated Spurious Emissions for Band Classes 2, 3, 4, 16 5, 6, 8, 9, 11, and 12 3-16 17 Table 4.2.1.2-1. Access terminal assignment used for error vector magnitude computation4-2 18 Table 4.2.1.3-1. Access terminal assignment used for error vector magnitude c

41、omputation4-2 19 Table 4.4.1.3-1. General Spectral Emission Mask for different bandwidths 4-6 20 Table 4.4.1.3-2. Additional Spectral Emission Mask (A-SEM1) for different bandwidths. 4-6 21 Table 4.4.1.3-3. Additional Spectral Emission Mask (A-SEM2) for different bandwidths. 4-7 22 Table 4.4.1.3-4.

42、SEM as a function of the channel BW 4-7 23 Table 4.4.1.3-5. Spurious requirements ITU Category A 4-7 24 Table 4.4.1.3-6. Spurious requirements ITU Category B 4-8 25 Table 4.4.1.3-7. PHS coexistence emission requirements 4-8 26 Table 4.4.1.3-8. ACLR specifications. 4-8 27 Table 5.1.1-1. Temperature R

43、anges 5-1 28 29 30 C.S0089-0 v1.0 x No Text.1 C.S0089-0 v1.0 xi FOREWORD 1 (This foreword is not part of this standard) 2 This specification provides techniques and limits on performance of access terminals. The 3 purpose of these limits is to provide assurance that compliant access terminals when u

44、sed 4 with compliant access network equipment will work in a variety of deployment scenarios. 5 6 7 C.S0089-0 v1.0 xii No Text. 1 2 C.S0089-0 v1.0 xiii SCOPE 1 (This scope is not part of this standard) 2 This Standard details definitions, methods of measurement, and minimum performance 3 characteris

45、tics for access terminals. This Standard shares the purpose of UMBTM 1 by 4 ensuring that an access terminal can obtain service in any system that meets the 5 compatibility requirements of UMB. 6 Compatibility, as used in connection with this Standard and UMB, is understood to mean 7 that any access

46、 terminal is able to open data connections in any UMB system. Conversely, 8 all UMB systems are able to open connections with any access terminal. 9 Test methods are recommended in this document; however, methods other than those 10 recommended may suffice for the same purpose. 11 The performance me

47、trics in this Standard require an access terminal to provide a single 12 antenna connector for testing. Access terminals having multiple antenna, such as for 13 receive diversity, shall provide a single antenna connector for testing. If an access 14 terminal has more than one antenna connector, only

48、 one connector shall be used for 15 testing. Additional requirements specifically for multiple antenna configurations, i.e. 16 receive diversity, are for future study. 17 18 19 1 Ultra Mobile BroadbandTM and UMBTM are trade and service marks owned by the CDMA Development Group (CDG). C.S0089-0 v1.0

49、xiv No Text.1 C.S0089-0 v1.0 xv NOTES 1 1. “Access network” refers to the network equipment providing data connectivity 2 between a packet switched data network (typically the Internet) and the access 3 terminals. Connectivity is typically provided at the Link Layer (PPP). 4 2. “Sector” refers to the part of the access network that provides the land-side modem. 5 3. This standard uses the following verbal forms: “Shall” and “shall not” identify 6 requirements to be followed strictly to conform to the standard and from which no 7 deviation is permitted. “Should” and “should not” ind