TIA-136-037-A-2002 TDMA Third Generation Wireless- R-UIM Application Toolkit (ANSI APPROVAL WITHDRAWN JUNE 12 2015).pdf

1、 ANSI/TIA-136-037-A-2002 APPROVED: APRIL 15, 2002 APPROVED: SEPTEMBER 18, 2013 WITHDRAWN: JUNE 12, 2015 TIA-136-037-A (Revision of TIA-136-037) April 2002TDMA Third Generation Wireless- R-UIM- Application Toolkit NOTICE TIA Engineering Standards and Publications are designed to serve the public inte

2、rest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Pu

3、blications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically o

4、r internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Pu

5、blication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limi

6、tations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-136.037-A-WD, formulated under the cognizance of the TIA TR-45 Mobile (b

7、) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involv

8、e the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a stat

9、ement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or condit

10、ions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respect

11、s the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise),

12、whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Nor

13、mative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the

14、 other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services o

15、r any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS

16、NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALT

17、H EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION

18、 ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSI

19、BILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA/EIA-136-037-A-2013 i Foreword This document references publications developed by ETSI (European Telecom

20、munications Standards Institute). These referenced publications are freely available at http:/www.etsi.org. Additional information or documentation may be found at http:/www.3GPP.org.TIA/EIA-136-037-A-2013 ii Contents Foreword i 1. Purpose and Scope .1 2. R-UIM File Modification Management4 3. Refer

21、ences (Normative) .6 4. Change History for TIA/EIA-136-0377 TIA/EIA-136-037-A-2013 iiiTables 1 Table 1 ME Guidelines for R-UIM File Modifications 4 2 TIA/EIA-136-037-A-2013 THIS PAGE INTENTIONALLY LEFT BLANKTIA/EIA-136-037-A-2013 11. Purpose and Scope 1 This part describes the interface between the

22、Mobile Equipment (ME) and the 2 Removable User Identity Module (R-UIM) for the R-UIM Application Toolkit (RAPT). 3 The RAPT builds upon the basic R-UIM/ME interface (see TIA/EIA-136-030) to provide 4 a set of mechanisms necessary for TIA/EIA-136 applications. This part incorporates by 5 reference an

23、d augments sections from GSM 11.14 2 (SIM Application Toolkit) 6 necessary for TIA/EIA-136 operation. 7 TIA/EIA-136-037-A-2013 2 TIA/EIA-136-037-A-2013 3TIA/EIA-136-037-A-2013 4 2. R-UIM File Modification Management 1 Whenever the R-UIM contents are modified as in the case of an over-the-air update

24、to 2 any of the Elementary Files, it may be necessary for the R-UIM to notify the ME of a 3 change in its configuration. As such, the ME may be required to update any images of 4 Elementary Files it may contain and/or perform some other procedures (i.e. power up 5 scan). For these situations, the R-

25、UIM shall use the SIM Tool Kit Command REFRESH 6 to notify the mobile of such changes to its configuration. Refer to GSM 11.14 2 for 7 further details. 8 When a REFRESH command is received, the ME shall update images of the information 9 it may contain, and shall perform a power up scan as required

26、by Table 1 as follows: 10 Immediately when on a DCCH. 11 Upon completion of a call when on a DTC. 12 Immediately when on an EGPRS-136 channel and GMM is not in the READY 13 state. 14 Upon transition to STANDBY state if GMM is currently in the READY state 15 when on an EGPRS-136 channel. 16 Table 1 M

27、E Guidelines for R-UIM File Modifications 17 File Updated ME performs Power Up Scan EFMIN(Mobile Identification Number) 4 EF ACCOLC(Access Overload Class) NA EF SID(System ID) 4 EF Home-SOC-MCC(Home System Operator Code and Mobile Country Code) 4 EF IPC(Initial Paging Channel) NA EF GPI(Group ID) NA

28、 EF AMPS-UI(AMPS Usage Indicators) NA EF S-ESN(SIM Electronic Serial Number) NA EF ANSI-UI(ANSI-136 Usage Indicators) 4 EF COUNT(Call Count) NA EF CSL(Cooperative SOC List) NA EF PSID(Positive/Favored SID List) 4 EF NSID(Negative/Forbidden SID List) 4 EF REG-THRESH(Registration Threshold) NA EF GA-P

29、HASE(GSM-ANSI-136 SIM Phase ID) NA EF IRDB-PARAM(IRDB Parameters) 4 EF NAM-PSID-RSID(NAM Private and Residential System IDs) 4 EF TSTREG-PSID-RSID(Test Registration Private and Residential System IDs) 4 EF REGACC-PSID-RSID(Reg Accept Private and Residential System IDs) 4 EF BAND-PRIO(Band and Sub-Ba

30、nd Priority Order) 4 EF BHT(BandHistory Table) NA EF DHT(DCCH History Table) NA EF AURP(Additional User Registration Parameters) NA EF PART-SID(Partner SID List) 4 TIA/EIA-136-037-A-2013 5EF PART-SOC(Partner SOC List) 4 EF FAV-SOC(Favored SOC List) 4 EF FORB-SOC(Forbidden SOC List) 4 EF A-TAG(Alpha

31、Tags) NA EF TS-TIMER(Triggered Scan Timers) NA EF TSAI(Teleservice Server Address Info) NA EF SSFC (SS Feature Code Table) NA EF IRDB-VER(IRDB Version Table) NA EF GPI(Group ID) NA EF DNI(Directory Number Info) NA EF MIPInfo(Mobile IP Address) NA EF AGCSP(Application Gateway Circuit Switched Paramet

32、ers) NA EF APD(Application Provisioning Data assoc. w/ the MS) NA EF AGIPAD(Application Gateway IP Address Data) NA EF MEAMap (Message Encryption Algorithm Map) 4 EF RPV(R-UIM Protocol Version) 4 EF RST(R-UIM Service Table) 4 EF SDCK(SOC De-personalization Control Key) NA EF EPSP(EGPRS-136 PSPs) 4 E

33、F TESTREG-EPSP(Test Registration EGPRS-136 PSPs) 4 EF REGACC-EPSP(Reg Accept EGPRS-136 PSPs) 4 EF VTSAI(Virtual Teleservice Server Address Info) NA TIA/EIA-136-037-A-2013 6 3. References (Normative) 1 1. GSM 11.14. Digital cellular telecommunications system (Phase 2+); 2 Specification of the SIM App

34、lication Toolkit for the Subscriber Identity Module Mobile 3 Equipment (SIM-ME) interface (GSM 11.14 Version 8.2.1 Release 1999). 4 Sophia Antipolis Valbonne: European Telecommunications Standards Institute. See 5 TIA/EIA-136-030 for specific version. 6 TIA/EIA-136-037-A-2013 74. Change History for

35、TIA/EIA-136-037 1 Revision A 2 Adopted Section(s) Description 2 Overview Deleted 3 Profile Download Deleted 4 Tag Value Deleted 5 Type of Commands and Next Action Indicated Deleted 3 THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT)

36、 industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).