TIA-2001 6-E-2-2011 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces-Part 6 (A8 and A9 Interfaces) (Addendum to TIA-2001 6-E).pdf

1、 TIA-2001.6-E-2 (Addendum to TIA-2001.6-E) September 2011Interoperability Specification (IOS) for cdma2000 Access Network Interfaces-Part 6 (A8 and A9 Interfaces) NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between

2、 manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any m

3、ember or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are

4、adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to addre

5、ss all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. PN-3-454

6、5.6-RV5-AD2, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editi

7、ng process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pendi

8、ng patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA

9、will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices

10、 suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether

11、designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other S

12、SO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the

13、 records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate

14、products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR US

15、E, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REG

16、ULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREI

17、N, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWIS

18、E, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Revision History Date Publication Description June 2007 A.S0016-D v1.0 For f

19、eatures supported, refer to the Overview 11, section 1.1. August 2009 A.S0016-D v2.0 Updates to support 1x air interface enhancements, EVRC-WB on A2p, EVRC-NW on A2 and A2p and bug fixes. May 2011 A.S0016-D v3.0 Support for callback of an emergency call origination, EVRC-NW capacity operating point

20、0, and bug fixes. TIA-2001.6-E-2 1 Section 1 Table of Contents 1 2 Foreword 5 3 1.0 Introduction 7 4 1.1 Overview 7 5 1.1.1 Purpose . 7 6 1.1.2 Scope 7 7 1.2 References 7 8 1.2.1 Normative References. 7 9 1.2.2 Informative References . 8 10 1.3 Terminology . 8 11 1.3.1 Acronyms 8 12 1.3.2 Definition

21、s 9 13 1.4 Message Body, Coding, and Ordering of Elements 9 14 1.5 Forward Compatibility Guidelines 11 15 1.6 Message Processing Guidelines .11 16 1.7 Message Definition Guidelines 12 17 2.0 Message Procedures 15 18 2.1 A8/A9 Interface Setup Procedures 15 19 2.1.1 A9-Setup-A8 15 20 2.1.1.1 Successfu

22、l Operation .15 21 2.1.1.2 Failure Operation .15 22 2.1.2 A9-Connect-A816 23 2.1.2.1 Successful Operation .16 24 2.1.2.2 Failure Operation .16 25 2.1.3 A9-BS Service Request .16 26 2.1.3.1 Successful Operation .16 27 2.1.3.2 Failure Operation .16 28 2.1.4 A9-BS Service Response .16 29 2.1.4.1 Succes

23、sful Operation .16 30 2.1.4.2 Failure Operation .16 31 2.2 A8/A9 Interface Clearing Procedures 17 32 2.2.1 A9-Release-A8 17 33 2.2.1.1 Successful Operation .17 34 2.2.1.2 Failure Operation .18 35 2.2.3 A9-Release-A8 Complete 18 36 2.2.3.1 Successful Operation .18 37 2.2.3.2 Failure Operation .18 38

24、2.2.4 A9-Disconnect-A8 .18 39 2.2.4.1 Successful Operation .18 40 2.2.4.2 Failure Operation .18 41 2.3 A8/A9 Interface Handoff Procedures 19 42 2.3.1 A9-Air Link (AL) Connected 19 43 2.3.1.1 Successful Operation .19 44 2.3.1.2 Failure Operation .19 45 2.3.2 A9-Air Link (AL) Connected Ack .19 46 2.3.

25、2.1 Successful Operation .19 47 2.3.2.2 Failure Operation .20 48 2.3.3 A9-Air Link (AL) Disconnected 20 49 2.3.3.1 Successful Operation .20 50 2.3.3.2 Failure Operation .20 51 2.3.4 A9-Air Link (AL) Disconnected Ack 20 52 2.3.4.1 Successful Operation .20 53 2.3.4.2 Failure Operation .20 54 2.4 A8/A9

26、 Interface Maintenance Procedures .20 55 TIA-2001.6-E-2 Section 1 2 2.4.1 A9-Version Info .20 1 2.4.1.1 Successful Operation .21 2 2.4.1.2 Failure Operation .21 3 2.4.2 A9-Version Info Ack .21 4 2.4.2.1 Successful Operation .21 5 2.4.2.2 Failure Operation .21 6 2.5 A9 Session Update Procedures 21 7

27、2.5.1 A9-Update-A8 .21 8 2.5.1.1 Successful Operation .22 9 2.5.1.2 Failure Operation .22 10 2.5.2 A9-Update-A8 Ack 22 11 2.5.2.1 Successful Operation .23 12 2.5.2.2 Failure Operation .23 13 2.6 A8/A9 Interface Data Delivery Procedures .23 14 2.6.1 A9-Short Data Delivery .23 15 2.6.1.1 Successful Op

28、eration .23 16 2.6.1.2 Failure Operation .23 17 2.6.2 A9-Short Data Ack 23 18 2.6.2.1 Successful Operation .24 19 2.6.2.2 Failure Operation .24 20 3.0 Message Formats .25 21 3.1 A8/A9 Interface Setup Messages .25 22 3.1.1 A9-Setup-A8 25 23 3.1.2 A9-Connect-A831 24 3.1.3 A9-BS Service Request .36 25

29、3.1.4 A9-BS Service Response .38 26 3.2 A8/A9 Interface Clearing Messages 39 27 3.2.1 A9-Release-A8 39 28 3.2.2 A9-Release-A8 Complete 43 29 3.2.3 A9-Disconnect-A8 .45 30 3.3 A8/A9 Interface Handoff Messages 49 31 3.3.1 A9-AL (Air Link) Connected 49 32 3.3.2 A9-AL (Air Link) Connected Ack .52 33 3.3

30、3 A9-AL Disconnected .54 34 3.3.4 A9-AL Disconnected Ack .56 35 3.4 A8/A9 Interface Maintenance Messages .57 36 3.4.1 A9-Version Info .57 37 3.4.2 A9-Version Info Ack .59 38 3.5 A9 Session Update Procedures 60 39 3.5.1 A9-Update-A8 .60 40 3.5.2 A9-Update-A8 Ack 65 41 3.6 A8/A9 Interface Data Delive

31、ry Messages .66 42 3.6.1 A9-Short Data Delivery .66 43 3.6.2 A9-Short Data Ack 69 44 4.0 Information Element Definitions .71 45 4.1 Generic Information Element Encoding 71 46 4.1.1 Conventions .71 47 4.1.2 Information Element Identifiers .72 48 4.1.3 Additional Coding and Interpretation Rules for In

32、formation Elements .73 49 4.1.4 Cross Reference of Information Elements With Messages 74 50 4.2 Information Elements 78 51 4.2.1 Active Connection Time in Seconds 78 52 4.2.2 Mobile Identity 79 53 4.2.3 Cause .82 54 4.2.4 SR_ID 84 55 4.2.5 PDSN Address .85 56 TIA-2001.6-E-2 3 Section 1 4.2.6 User Zo

33、ne ID .86 1 4.2.7 Quality of Service Parameters .87 2 4.2.8 Service Option .88 3 4.2.9 ADDS User Part 89 4 4.2.10 Call Connection Reference 90 5 4.2.11 Correlation ID 91 6 4.2.12 Anchor P-P Address 92 7 4.2.13 A9 Message Type 93 8 4.2.14 CON_REF .94 9 4.2.15 A9 Cell Identifier .95 10 4.2.16 A8 Traff

34、ic ID .96 11 4.2.17 A9 Indicators .98 12 4.2.18 Data Count .100 13 4.2.19 Access Network Identifiers 101 14 4.2.20 IS-2000 Service Configuration Record 102 15 4.2.21 Software Version .103 16 4.2.22 Anchor PDSN Address 104 17 4.2.23 A9 PDSN Code 105 18 4.2.24 RN-PDIT .106 19 4.2.25 Service Instance I

35、nfo .107 20 5.0 Timer Definitions 109 21 5.1 Timer Values .109 22 5.2 Timer Definitions 109 23 5.2.1 TA8-setup .109 24 5.2.2 Tdiscon9 .109 25 5.2.3 Trel9 .109 26 5.2.4 Talc9 109 27 5.2.5 Twaitho9 110 28 5.2.6 Tbsreq9 110 29 5.2.7 Tald9 110 30 5.2.8 Tsdd9 110 31 5.2.9 Tupd9110 32 5.2.10 Taldak .110 3

36、3 5.2.11 Tvers9 .110 34 35 36 TIA-2001.6-E-2 Section 1 4 List of Tables 1 2 Table 1.4-1 Element Flow DIRECTION Indication .10 3 Table 4.1.2-1 A9 Information Element Identifiers Sorted by Identifier Value 72 4 Table 4.1.4-1 Cross Reference of Information Elements with Messages 74 5 Table 4.2.2-1 Mobi

37、le Identity - Type of Identity Coding.79 6 Table 4.2.3-1 Cause Class 82 7 Table 4.2.3-2 Cause Values .83 8 Table 4.2.8-1 Service Option Values .88 9 Table 4.2.15-1 Cell Identifier .95 10 Table 4.2.16-1 A8 Traffic ID - A8 Transport Protocol Stack 96 11 Table 4.2.16-2 A8 Traffic ID - Address Type 97 1

38、2 Table 4.2.17-1 A9 Indicators SDB Supported 98 13 Table 4.2.23-1 PDSN Code Values 105 14 Table 5.1-1 Timer Values and Ranges Sorted by Name .109 15 16 17 TIA-2001.6-E-2 5 Section 1 Foreword 1 2 This foreword is not part of this standard. 3 4 This document was produced by TSG-A of the Third Generati

39、on Partnership Project 2. This document was 5 developed in accordance with the procedural guidelines of 3GPP2 and its Organizational Partners, and 6 represents the consensus position of these groups. 7 8 9 10 TIA-2001.6-E-2 Section 1 6 (This page intentionally left blank.) 1 2 3 4 TIA-2001.6-E-2 7 S

40、ection 1 1.0 Introduction 1 2 1.1 Overview 3 This document contains the message procedures, bitmaps, information elements and 4 timers used to define the A9 interface. 5 1.1.1 Purpose 6 The purpose of this document is to provide the standard for interfacing a PCF with one or 7 more BSs. This documen

41、t defines the functional capabilities, including services and 8 features, of the specified interface. These services and features are the defining 9 characteristics that are the basis for the overall system standard. 10 1.1.2 Scope 11 This standard provides the specification for the interface which

42、coincides with the 12 Reference Point “Aquinter” defined in the TR45 Network Reference Model shown in I-2. 13 The scope of this standard includes the following topics: 14 Descriptions of the specified functional capabilities that provide packet data services 15 across the BS-PCF interface; 16 Descri

43、ptions of the division of responsibility of the functions provided between the 17 BS and the PCF without prescribing specific implementations. 18 1.2 References 19 References are either normative or informative. A normative reference is used to include 20 another document as a mandatory part of a 3r

44、d Generation Partnership Project 2 (3GPP2) 21 specification. Documents that provide additional non-essential information are included 22 in the informative references section. 23 1.2.1 Normative References 24 The following standards contain provisions which, through reference in this text, 25 consti

45、tute provisions of this standard. At the time of publication, the editions indicated 26 were valid. All standards are subject to revision, and parties to agreements based on this 27 standard are encouraged to investigate the possibility of applying the most recent editions 28 of the standards indica

46、ted below. 29 1 3GPP2 C.S0001-E v3.0, Introduction to cdma2000 Standards for Spread 30 Spectrum Systems, June 2011. 31 2 3GPP2 C.S0002-E v3.0, Physical Layer Standard for cdma2000 Spread 32 Spectrum Systems, June 2011. 33 3 3GPP2 C.S0003-E v3.0, Medium Access Control (MAC) Standard for cdma2000 34 S

47、pread Spectrum Systems, June 2011. 35 4 3GPP2 C.S0004-E v3.0, Signaling Link Access Control (LAC) Standard for 36 cdma2000 Spread Spectrum Systems, June 2011. 37 5 3GPP2 C.S0005-E v3.0, Upper Layer (Layer 3) Signaling Standard for 38 cdma2000 Spread Spectrum Systems, June 2011. 39 6 3GPP2 C.S0006-D

48、v2.0, Analog Signaling Standard for cdma2000 Spread 40 Spectrum Systems, September 2005. 41 7 Reserved. 42 TIA-2001.6-E-2 Section 1 8 8 3GPP2 X.S0011-D v2.0, Wireless IP Network Standard, six parts, November 1 2008. 2 9 3GPP2 X.S0004-550-E v4.0, Mobile Application Part (MAP) - Parameters 3 Signaling

49、 Protocols, January 2010. 4 10 Reserved. 5 11 3GPP2 A.S0011-D v3.0, Interoperability Specification (IOS) for cdma2000 6 Access Network Interfaces Part 1 Overview, May 2011. 7 12 Reserved. 8 13 3GPP2 A.S0013-D v3.0, Interoperability Specification (IOS) for cdma2000 9 Access Network Interfaces Part 3 Features, May 2011. 10 14 3GPP2 A.S0014-D v3.0, Interoperability Specification (IOS) for cdma2000 11 Access Network Interfaces Part 4 (A1, A1p, A2, and A5 Interfaces), May 2011. 12 15 Reserved. 13 16 Reserved. 14 17 3GPP2 A.S0017-D v3.0, Interop